)
1.
Attach Rear Stabilizer with handle (
12
) to mounting plate on the
main frame and secure with two Hex Head Bolts (
93
), two
Washers (
126
) and Curved Washers (
125
) by using Wrench (
135
).
2.
Route the Computer Cable (
41
) through the bottom of the Main
Mast (
2
) and out of the mast on top using the wire snake that is
attached to the cable. Secure the Main Mast on the mounting plate
on the Main Frame with four Socket Head Cap Bolts (
96
), four
Washers (
126
) and four Flat Washers (
119
) by using L Allen Wrench
(
138
). Use extreme caution during this step to ensure the cable does
not get pinched between the mast and main frame.
3.
Secure the Support Member (
13
) on the mounting plate of the Main
Frame and Main Mast (
2
) with four Socket Head Cap Bolts (
96
), four
Washers (
126
), four Flat Washers (
119
), two Hex Head Bolts (
90
)
and two Curved Washers (
125
) by using L Allen Wrench (
138
) and
Wrench (
135
).
