Customer Service 1-888-707-1880
Dyaco Canada Inc. 2018
Email: [email protected]
15
PAUSE/STOP/RESET FEATURE
1. When the treadmill is running the pause feature may be utilized by pressing the red
Stop key once. This will slowly decelerate the tread-belt to a stop. The Time, Distance
and Calorie readings will hold while the unit is in the pause mode.
2. To resume your exercise, when in Pause mode, press the Start key. The speed will
return to the previous settings.
3. Pause is executed when the Stop key is pressed once. If the Stop key is pressed a
second time, the console will reset and return to the idle mode (start up) screen.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note:
This is only a rough guide used for comparison of different exercise sessions, which
cannot be used for medical purposes.
TO TURN TREADMILL OFF
1. Display will automatically turn off (go to sleep) after 10 minutes (no key operations).
The treadmill will draw very little current in sleep mode (about as much as your television
when it is turned off).
2. Remove tether cord.
3. Turn off the main switch on the front of the treadmill, below the motor cover.
LUBE MESSAGE
When “Lube” appears on the LCD check lubrication under walking deck. See the
instructions on page 18 to add lube as needed. After application hold ENTER for 3 seconds
to reset the message.
