background image

- 23 - 

Technical Support 

 
 

If you have questions about this product, or if you experience difficulties during the installation, 
contact DX Engineering at (330) 572-3200.  You can also e-mail us at:    
   

[email protected]

 

 

For best service, please take a few minutes to review this manual before you call. 

 
 

Warranty 

 

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a 
period of one (1) year from date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue 
credit, repair or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be 
made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or any other work, unless such 
charges are authorized in advance by DX Engineering.  If DX Engineering’s products are claimed to be defective in 
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to 
DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be 
deemed to be waived by Buyer unless made in writing. The above warranties shall not extend to any products or parts 
thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of 
improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as 
prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, 
and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer’s specifications. 
In addition, DX Engineering’s warranties do not extend to other equipment and parts manufactured by others except to 
the extent of the original manufacturer’s warranty to DX Engineering.  The obligations under the foregoing warranties 
are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other 
remedies including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY 
OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING 
WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME 
FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE 
FOREGOING. 
 
©DX Engineering 2012 
 
DX Engineering

®

, DXE

®

, DX Engineering, Inc.

®

 , Hot Rodz

®

, Maxi-Core

®

, DX Engineering THUNDERBOLT™, DX 

Engineering  Yagi  Mechanical

®

,  EZ-BUILD

®

,  TELREX

®

  and  Gorilla  Grip

®

  Stainless  Steel  Boom  Clamps,  are 

trademarks of PDS Electronics, Inc. No license to use or reproduce any of these trademarks or other trademarks is given 
or implied. All other brands and product names are the trademarks of their respective owners. 
 
Specifications subject to change without notice.        

        

 
                                                                       

Содержание DXE-VA-PIVOT-4

























Отзывы: