DX Engineering DXE-VA-PIVOT-4, Руководство пользователя

Страница: 17 / 24

- 16 -
4. Turn the crank on the manual winch to lower, or raise the antenna. After raising your antenna
completely, make sure you replace the four bolts that were removed in step 3. The manual
winch should be removed when not in use to protect the gears and web strap from weather and
environmental effects.
Shown with Customer Supplied Mounting Pipe, 4”
Antenna Base Section and Optional Manual Winch
Note: Sawhorses, chairs, or ladders should be used to support the vertical sections during
assembly with the pivot base and whenever the vertical is tilted down to allow easy
maintenance, or when making adjustments.
Lowering or Raising the Vertical Element Assembly
1. To lower the antenna, ensure the winch hook is in the Antenna Hook Mount. Remove the four
bolts and hardware that hold the Pivot Lock Plate to the Pivot Base Winch Mount Plate. You
can now use the winch to pivot your antenna downward.
Four Bolts to be removed to allow for pivoting