22
Interconnection Diagrams
NOTE:
The following diagrams do not show all of the wiring that may be required.
The interconnection cables (lines) shown in the diagrams are labeled with equipment
connector names. Some of the common lines such as power and grounding are not
shown for clarity. Always consult your radio’s manual for additional connection
information. Additionally, the RTR-s may have optional plug-in modules as needed
for 50 to 75 ohm Transformer Impedance, Receiver Guard protection and
Preamplification.
Diagram 1
-
Active Receive Antenna and Transmit Antenna. Allows use of an active receive
antenna with the optional preamplifier installed in the RTR-2
