9
DXE-RTR-2 Front Panel
PWR ON:
Toggle Switch - RTR-2 power
ON
and off. +13.8 Vdc power is supplied
via the rear panel center positive connector.
PWR
LED indicator: LED (Light Emitting
Diode) illuminates Green to indicate the
RTR-2
POWER ON
is turned on. With
power connected to the unit, when the
POWER ON
toggle switch is turned off,
the LED will illuminate yellow.
OPTION:
Green LED. Illuminates green when
OPTION
toggle switch is turned
ON
OPTION ON:
Toggle Switch turns power on for the internal
Option 3
slot. Option 3 slot is for the
optional
DXE-RPA-2PM
Receive Preamplifier Plug-in Module.
RX ANT:
Mode
-
Two color LED (Red, Blue, or off)
indicator illuminates Blue to indicate the
RTR-2 is in the receive mode (and there is a keying cable connected). When the LED is red, it
indicates you are in the
MAIN ANT
transmit mode. This LED extinguishes when the keying cable
is not connected or when the unit is turned off.
MAIN ANT - RX ANT - MAIN ANT:
Three-position
toggle switch provides manual control of
the RTR-2
-
antenna selections:
MAIN ANT
(up) - Manually switches
RADIO
to the
MAIN ANT
for receiving with the
transmitting antenna.
RADIO
remains connected to
MAIN ANT
during transmit. Mode
LED is red when keying cable is connected and
POWER
is
ON
.
RX ANT
(center) - Switches the
RADIO
to the
RX ANT
for receive mode and allows
automatic switching of the
RADIO
to the
MAIN ANT
during transmit. Mode LED is blue.
MAIN ANT
(momentary on when pressed down) - Manually switches
RADIO
to
MAIN
ANT
momentary for a fast check of reception on the transmitting
MAIN ANT
(mode LED is
red).
For those that want a slightly larger switch handle on the RTR three-position
toggle switch, a black switch cap has been included with the RTR-2. Push this
cap fully in place as shown.
