DX Engineering DXE-MBV-1, Руководство пользователя

Страница: 4 / 24

- 3 -
Tools Required
Two 7/16” wrenches, (one of them should be open-end)
5/16”, 3/8”, 7/16”, and 1/2” wrenches or
5/16”, 3/8”, 7/16”, and 1/2” sockets and drive
Medium size flat blade screwdriver or 5/16” nut driver for the element clamps
Medium size flat blade screwdriver or 1/4” nut driver for the smaller element clamps
Tape measure
Felt-tip marker
DXE-MBV-1 Parts List
Description Quantity Description Quantity
Tilt Base Assembly
(patented)
Antenna Assembly
Tilt Base, 3/16" Laser Cut Stainless Steel 1 2.00 x 0.125" x 36" Tube. Drilled 1
DXE-SSVC-2P V-Bolt Saddle Clamp 2 2.125" x 0.058" x 36" Tube. (Split both ends) 1
Tilt Base, Mast Mount Channel 1 2.000" x 0.058" x 72" Tube. (Split one end) 1
Tilt Base Plate 1 1.875" x 0.058" x 72" Tube. (Split one end) 1
1/4-20 x 2" HH Bolt, full thread 4 1.750" x 0.058" x 36" Tube. (Split one end) 1
1/4" Flat Washer 4 1.625" x 0.058" x 36" Tube. (Split one end) 1
1/4" Split Washer 4 1.500" x 0.058" x 36" Tube. (Split one end) 1
1/4" Dia. X 1/4" x 1/2" OD Alum. Spacer 4 1.375" x 0.058" x 36" Tube. (Split one end) 1
1/4-20 Hex nut 4 1.250" x 0.058" x 36" Tube. (Split one end) 1
1/4" Fender Washer, 1" OD 4 1.125" x 0.058" x 36" Tube. (Split one end) 1
1/4-20 Flanged Nut 2 1.000" x 0.058" x 36" Tube. (Split one end) 1
1/4-20 Nyloc nut 4 DXE-ECL-10SS - Element Clamp 1
3/8" U-Bolt Kits 2 DXE-ECL-12SS - Element Clamp 1
DXE-ECL-16SS - Element Clamp 2
Feedpoint Connection DXE-ECL-20SS - Element Clamp 2
1/4-20 x 1" HH Bolt, full thread 1 DXE-ECL-24SS - Element Clamp 2
1/4" External Tooth Washer 2 DXE-ECL-28SS - Element Clamp 2
1/4" Flat Washer 2 Black Vinyl Cap, 0.9375" ID 1
1/4-20 Hex nut 2
Suggested Parts Not Included
DXE-UN-43 - Multi-Band UNUN for Vertical Antenna Systems
The DXE-UN-43 DX Engineering Multi-Band Vertical UNUN built with proven Maxi-Core
®
Technology is a matching device specifically designed for application with non-resonant
vertical multi-band antennas.
The
DXE-UN-43 assures the best efficiency from your vertical multi-band antenna and
transmission line/tuner installation. Using the DXE-UN-43 results in minimizing the additional
transmission lines losses caused by SWR and allows your antenna to perform to its full
potential. The
DXE-UN-43 reduces the stresses on your equipment more efficiently than similar
competitive products.
By allowing your wide-range tuner to more easily match the antenna’s complex impedance, low
frequency performance is improved over other devices currently available.