19
DXE-SNS6-25 - Watertight Coax Connector, Snap-N-Seal for CATV F-6 Cable, 25 pieces
Snap-N-Seal is an environmentally sealed CATV F coax connector system for harsh environments. The connectors have a unique,
360 degree radial compression system that offers the signal leakage protection required for high performance receive systems.
Quad sealed system prevents moisture from migrating into the connection
360 degree radial compression provides superior RF integrity (-95dB typical, 60% bonded foil cable)
Easy cable preparation
Connector to cable retention of 40 lbs minimum
Superb impedance match to 1 GHz
Manufactured of high quality 360 brass, cadmium plated with yellow chromate coating for maximum corrosion resistance
UV-resistant plastic and O-rings provide a reliable environmentally sealed connector
An installation tool, such as the
DXE-SNS-CT1
, is required to install the connectors. Normal crimping tools or pliers will not work.
DXE-SNS-CT1 - Compression Tool for Snap-N-Seal 75-ohm Coax Connectors
Ratchet compression tool for installing
75-ohm Coax connectors. Ordinary pliers will not install these
connectors properly.
DXE-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our DX Engineering wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10
gauge. Just insert the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire
stripping job performed in about 2 seconds- a fraction of the time it takes your pocket knife to do the same job.
An adjustable wire length guide helps you make uniform strips, and a built-in wire cutter and crimper helps you
complete your wiring job.
Spring-loaded design - Strips wires ranging from 24 to 10 gauge - built-in wire cutter and crimper
DXE-PSW-12D1A - AC Adapter 12 Volt DC 1000 mA Wall Transformer
120 Vac 60 Hz input - 12 Vdc, 1 Amp, Fused output. A standard 2.1 mm plug connection for 12 Vdc.
Outer connection
is
GROUND
Center Pin
is input for
+12 VDC
.
