DX Engineering DXE-AOKC-17M, Руководство пользователя

Страница: 10 / 16

- 10 -
6. Attach one end of the approximately 107” 17 Meter element wire with terminal (12) to the lower
insulator assembly as shown below. Fold the wire so there is approximately 10” of wire in a
loop.
Note carefully how the wire is routed through the insulator in reference to the
insulator’s cupped area
. When you have completed the wire installation, you want
approximately 8” of wire as shown below. You can make adjustments to the wire positioning as
needed before continuing to the next step in the assembly.
Element wire shown as White for clarification - actual color is Black
Element wire shown as Red for clarification - actual color is Black
7. Remove the previously installed nyloc hex nut (7), attach the black element wire with terminal
(12) to the lower bracket (4) as show below. Insert the end of the spring (8), re-attach the nyloc
hex nut (7) and tighten. Allow a small gap so the spring can still rotate.