DX Engineering DXE-7580FS-VA-3, Руководство пользователя

Страница: 39 / 40

- 38 -
DXE-UHF-FDFB-KIT - Silver Plated Female SecureMount
™
Bulkhead Connector - Dual SO-239
The DX Engineering Silver Plated Female SecureMount
™
Bulkhead Connector is a high-quality silver-plated connector that provides
a positive, permanently secure connection for your coaxial cable. The two-sided SO-239 female connector has a superior silver-
plated body with silver contacts to ensure the best performance for any application. The SecureMount
™
flange, which employs four
mounting screws, means that the bulkhead connector won't work loose like those with concentric nuts and washers. Once mounted to
any panel or bulkhead, the flanged bulkhead connector will provide the best possible connection and stay that way. Additionally,
when using our Radial Plate, Tower Leg Brackets or SO-239 Mounting Brackets, the SecureMount
™
Bulkhead Connectors are the
best way to bond your coax to ground this side of Cad-Welding! Unlike many common nickel-plated bulkhead connectors, our silver-
plated SecureMount bulkhead connectors have no air space within their midpoint. This area of solid and superior PTFE dielectric
between the center conductor and body maintains constant impedance and ultimate performance.

Description: Bulkhead mount, UHF jack to UHF jack (SO-239)

Body Material: Brass

Body Plating: Silver

Body Style: Flanged Dual Female SO-239

Contact Plating: Silver

Frequency Range: DC - 500 MHz

Dielectric: PTFE

Impedance: 50 ohms
Includes Stainless Steel Hardware Kit for mounting
DXE-T001 - DX Engineering SO-239 Connector Installation Tool Kit
This DX Engineering SO-239 connector installation tool kit offers an easier installation of chassis or bulkhead mount SO-239 coaxial
connectors. Having the right tools can make all of the difference in your shack, and this handy DXE tool provides
you with a special dual-use stainless steel wrench, plus a multipurpose 6-in-1 screwdriver/nut driver tool. One end
of the wrench is a 3/4 in. semi-box wrench with a pass-through for coaxial cable--perfect for tightening the larger
nuts used to mount bulkhead connectors. The other end is a 3/16 in. box wrench for tightening mounting nuts with
SO-239 hardware. You'll receive six combinations - two Phillips heads, two flatheads, and a 1/4 in. nut driver and
a 5/16 in. nut driver, which store in the handle of the screwdriver. The added SO-239 wrench is ideal for use with
the
DXE-UHF-FDFB-KIT - Silver Plated Female SecureMount
™
Bulkhead Connector.
3M Temflex™ 2155 Rubber Splicing Tape
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating and moisture
sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
Scotch
®
Super
33+.
Scotch
®
Super 33+
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy handling for all
around performance. It also combines PVC backing with excellent electrical insulating properties to provide primary
electrical insulation for splices up to 600V and protective jacketing. Both tape products are available from DX Engineering.
DXE-FP-WIRE-P - Feedpoint Wire and Connector Assembly
DX Engineering Feedpoint Wire and Connector Assemblies provide a new and unique method of feeding an antenna radiating
element. A ring terminal with a 1/4 in. hole is crimped and soldered to a 12 in. long insulated 14 AWG stranded copper
wire, with weather-protective heat shrink tubing. The Feedpoint wire is terminated to the center pin of a UHF male PL-
259 with special insulating sleeves and weather-sealing heat shrink. This assembly is intended to be used with a double
female bulkhead connector, mounted into the Radial Plate, for use on an HF vertical antenna. The wire and connector
combination allows for the complete weather sealing of a single wire feedpoint, while properly terminating the feedline
shield to the radial system or ground point of the antenna system.
DXE-VMN-1 - Vertical Antenna Matching Network
The DXE-VMN-1 Vertical Antenna Matching Network is custom designed for use with base-fed quarter wave resonant vertical
antenna systems. In some vertical antenna installations with excellent radial systems, achieving the best SWR on a
resonant vertical for 80 meters may be difficult without some means of adjusting feedpoint impedance. The
DXE-
VMN-1 allows easy adjustment for lowest SWR. The DXE-VMN-1 Vertical Antenna Matching Network will aid in
tuning a low impedance antenna to the minimum SWR in the customer selected portion of the 80 meter band. The #12
AWG coil wire is tin-nickel plated for high power handling, corrosion resistance, ease of soldering and long term
reliability.
As an added benefit, the DXE-VMN-1 will also act as a static bleed for your resonant vertical antenna in
areas where precipitation or snow static is present. The Vertical Matching Network may be installed between ground
and the feedpoint of any quarter wave base-fed vertical antenna - including mobile antennas.