DX Engineering DXE-7580FS-VA-3, Руководство пользователя

Страница: 38 / 40

- 37 -
Additional Material Required, but not Supplied:
DXE-VGMT-3CG -Antenna Mounting Pipe - 3” OD x 7 Feet long 1/4” Wall thickness -
Galvanized Chromoly Steel mounting pipe.
Concrete - For mounting pipe installation ( see text for detailed suggestions )
Feedline Connection
- Use the D DXE-UHF-FDFB-KIT SecureMount
™
dual SO-239 Bulkhead
Mount Connector with the DXE-FP-WIRE-P Feedpoint Wire Connector Assembly in conjunction
with the optional DXE-RADP-3 Radial Plate and a customer supplied wire and ring terminal ( see
text for suggestions ).
JTL-12555 Jet-Lube
™
SS-30 Pure Copper Anti-Seize
Jet-Lube
™
SS-30 Pure Copper Anti-Seize is the top choice of engineers and technicians in government, industry and leading Amateur
Radio contest stations, for protecting mechanical assemblies of aluminum tubing, general hardware and copper grounding
systems. On bonded metal surfaces Jet-Lube
™
SS-30 assures electrical and RF conductivity while preventing oxidation
and corrosion. Surpassing the capabilities of other aluminum anti-oxidants, the wide temperature range of Jet-Lube
™
SS-
30 prevents long-term drying and caking, and allows easy disassembly and effortless cleaning of parts. An
environmentally preferred thread lubricant and conductive termination compound, Jet-Lube
™
SS-30 helps keep your
equipment in serviceable condition. It contains a high concentration of copper flakes, a requirement for heavy loads or
compression; controlled frictional characteristics allow the surfaces of nuts and bolts to be tightened to their design torque
specifications. This anti-seize product assures full hydraulic efficiency by allowing the metal surfaces to slide over each
other without damaging metal-to-metal contact. Jet-Lube
™
SS-30 is also designed to work as a similar and dissimilar
component between two metal surfaces to prevent seizing and galvanic action. The SS-30 compound formula improves
conductivity and ground continuity - and will not melt in high temperatures.
Jet-Lube
™
SS-30 Pure Copper Anti-Seize Features include:
* Meets MIL-PRF-907E spec
* K-factor: 0.13
* Service rating: -65 degrees F (-54 degrees C) to 1800 degrees F (820 degrees C)
* SS-30 Resistivity (ohm-CM x 108) 5
* This product is limited to domestic UPS Ground shipping only
Suggested Parts Not Included
DXE-VRW-1 - Manual Winch Add-on Raising Kit
Manual winch add-on kit for the High Performance DX Engineering vertical antennas. The tilt fixtures for these
antennas are equipped to accept the winch directly. Allows easy raising and lowering of tall antennas - may be
easily moved from one antenna to another in multi-antenna arrays.
DXE-RADP-3 - Radial Plate ( patented ):
Made from Laser Cut Stainless Steel with 20 Sets of Stainless Steel Radial Attachment Hardware. The DX Engineering
Radial Plate is meant for those of you having a vertical antenna and want an easy, neat and effective way to connect
those essential radial wires to your antenna system for the highest efficiency and strongest signals.
DXE-SSVC-3P - Stainless Steel V-Clamp for 2 to 3 inch steel pipe
This V-Clamp is made in one size that fits Steel tubing or pipe from 2'' to 3'' OD as used in antenna construction. The
supplied V-bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special
Stainless Steel saddle has serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not
recommended for softer aluminum tubing or pipe. U-Bolt thread dimensions: 3/8-16 x 1.75". V-bolt and saddle made
from high-strength 18-8 stainless steel