DX Engineering DXE-60VA-1P, Инструкция по эксплуатации

Страница: 23 / 24

- 22 -
DXE-RADW-500KBD or 1000KBD - Bulk Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial
wire kit use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly
available at the big box stores. It will last much longer in contact with soil than bare wire. The biodegradable anchors
allow easy installation of radial wires, and will degrade and disappear in a year or so when they are no longer needed.
The DXE-RADW-500 or 1000KBD kits provide everything you will need to build the perfect radial system!

500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation, 20/40 lugs, 100/200 biodegradable radial
wire anchor pins- Eliminating the need to bury your radials!, Build up to 20/40 radials, 25 feet long
DXE-RADW-500KBD Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Biodegradable Staples
DXE-RADW-1000KBD Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Biodegradable Staples
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of
damaging your radials during lawn maintenance. 100 count - 6'' Pins, 11-Gauge
DXE-STPL-100P Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P Radial Wire Anchor Pins, 300/pack
DXE-RADW-20RT/32RT/65RT Pre-Assembled, Radial Wire, w/ 1/4" ring Terminals, 20 Pack
The DXE-RADW-Radial Wire Kits include the highest quality 14 gauge stranded copper wire with a relaxed black PVC insulation
for easy installation of your radial system. They allow fast and easy installation of your radial ground system, and permit you to mix
and match different length to fit the available space. The stranded wire and relaxed insulation mean that the wire will lay flat as you
place it on the ground - easy to install. The twenty pre-cut radial wires include 1/4" ring terminals professionally crimped on one end
for quick and easy attachment to the radial plate. These Radial Wire Kits are designed for users of vertical antenna systems which
have the need for a high quality radial system for optimum antenna performance. The 1/4" ring terminals are machine crimped for
maximum grip. Soldering is not required for strength, but is recommended if installed in corrosive environments such as salt spray.

Packed 20 Radial Wires per package, 14 gage, stranded copper wire, Black relaxed PVC insulation, 1/4"
Ring Terminal professionally crimped on each Radial Wire, 3 lengths to choose from: 20 Ft (-20RT), 32
Ft (-32RT), 65 Ft (-65RT)
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3” biodegradable anchors that are produced from recycled PLA
(Polylactide Resin). Depending on the weather conditions, they will degrade in about a year. They are easily installed and
will hold radial wires in place until lawn roots overtake them - and then disappear. Ecologically friendly!
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20-pk
This is a set of 20 ring terminals for AWG #14 to 16 wire with a clearance hole for a 1/4" bolt. These are the same crimp
terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our DX Engineering wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert
the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire stripping job performed
in about 2 seconds- a fraction of the time it takes your pocket knife to do the same job. An adjustable wire length guide
helps you make uniform strips, and a built-in wire cutter and crimper helps you complete your wiring job.

Spring-loaded design

Strips wires ranging from 24 to 10 gauge

built-in wire cutter and crimper
DXE-3M2155 - 3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating and moisture
sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
TRM-06132
TRM-06132 - Scotch® Super 33+
.
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy handling for
all around performance. It also combines PVC backing with excellent electrical insulating properties to provide primary
electrical insulation for splices up to 600V and protective jacketing.
DXE-RADW-20RT Package of 20 each 20 Ft Radials with 1/4" Ring Terminals
DXE-RADW-32RT Package of 20 each 32 Ft Radials with 1/4" Ring Terminals
DXE-RADW-65RT Package of 20 each 65 Ft Radials with 1/4" Ring Terminals