DWT 742654, Оригинальное руководство пользователя

Страница: 11 / 76

11
English
the operator's attention, and he may loose control over
the tool.
Electric safety recommendations
• The tool plug should always be inserted to an
appropriate socket. This reduces the risk of electric
shock. Do not use plug adapters with grounding
contacts.
• Avoid touching grounded items, such as metal pipes,
heaters, cookers and refrigerators. If the worker's body
comes into contact with a grounded item, the danger of
electric shock increases.
• Protect the power tool against rain and moisture.
Penetration of water into the tool increases the danger
of electric shock.
• Do not use the power supply cable for purposes
other than designed. Under no circumstances should
one use the cable to carry the tool or pull it; also, it is
forbidden to switch off the tool by pulling the power
supply cable. Protect the cable against heating, contact
with kerosene-based bodies, with sharp edges or
mobile parts of the tool. A power cable that is damaged
or spliced increases the danger of electric shock.
• When working in open air, use extension cords
designed for this type of work, which will reduce the
danger of electric shock.
Personal protection recommendations
• Be cautious when working with power tools, and
carefully plan your actions. Do not use the tool when
fatigued, or under the influence of drugs, alcohol or
medicines. Careless handling may result in serious
injuries.
• Use personal protection equipment. Always wear
protective goggles. When necessary, use respirators,
non-slipping boots, hard hats and earplugs. The use
of personal protection equipment is one of the factors
that reduce the risk of injuries.
• Avoid incidental activation of power tools. Before
inserting the plug, make sure that the power switch is in
OFF position. When carrying the tool, take your fingers
off the main switch, which will reduce the possibility of
incidental activation.
• Before switching on the tool, remove any wrenches
and other objects from its rotating parts. A wrench left
in the rotating unit may result in serious injuries.
• Do not apply excessive force, take a stable position
and always try to keep balance - this will facilitate
control over the tool.
• Do not wear loose clothes or freely-hanging
jewellery. Hair, parts of garment and gloves should
be protected against contact with moving parts of the
power tool.
• If the tool is equipped with a dust collection device,
make sure that the device has been activated and
used properly. Use of such devices helps reduce the
concentration of dust at the workstation.
Use and handling of power tools
• The persons with lowered psychophysical or mental
aptitudes as well as children can not operate the power
tool, if they are not supervised or instructed about use
of the power tool by a person responsible for their
safety.
• Do not overload the tool. Power tools are to be used
only in operations, to which they have been designed,
which will ensure safety and help achieve better
results.
• Do not use power tools with a damaged power
switch. A tool that cannot be switched on and off in a
controlled manner is potentially dangerous and must
be repaired immediately.
• Before adjustment operations, replacement of
attachments, and during storage, remove the power
tool plug from the mains socket. This eliminates the
risk of the tool being unintentionally activated.
• The tool should be stored out of children's reach.
Do not allow the use of power tools by persons who
have not read this manual and are inexperienced. In
the hands of an inexpert person, the tool may be dan -
gerous both for the operator and his environment.
• Take proper care of the tool condition. Monitor the
axial run-out and stability of movable parts' joints, and
pay proper attention at any faults that may result in the
tool damage. Bad condition of power tools is a frequent
cause of accidents.
• Cutting tools should be kept clean and must be well-
sharpened. Cutting tools with sharp cutting edges,
which are properly fixed reduce the risk of seizure and
facilitate the control over power tools.
• When using power tools and its accessories, follow
the instructions listed in this manual. During work with a
specific type of power tools, follow recommendations,
taking into account operational conditions and the type
of job performed.
Service of power tools
Your power tool should be serviced only by qualified
specialists, with the use of recommended spare parts.
This will guarantee labour safety, when your tool is
being applied.
Safety guidelines during
power tool operation
Before commencing operation
• Spraying inflammable materials increases the risk
of fire or explosion, so please follow all the required
precautions and ensure that there are fire-extinguishing
means on site.
• After handling inflammable materials (for example,
after mixing or thinning paint or after cleaning any parts
of the power tool) remove all used containers and the
cloth, as they may cause fire.
• Make sure that the area where the works will
take place is properly ventilated - gases or vapors
generated during work may be harmful to your health
and increase the risk of fire or explosion.
• Do not work near the sources of open fire or sparks,
hot objects, engines.
• Do not spray materials having a flash point
below 21°С - this increases the risk of fire or explo -
sion.
• Prior to spraying the material, carefully read
manufacturer's instructions in order to undertake the
appropriate safety measures.
• Do not spray unknown materials or materials with
unknown dangers.
• Do not spray any materials that can damage the
power tool; if the power tool breaks as a result, your
warranty will be voided. Spraying acids, alkalis, materi -
als containing abrasive particles, materials containing