Dwin TransVision 4, Руководство пользователя

Страница: 42 / 43

37
• Unstable Pixel – No unstable pixels.
DWIN Electronics will, at its option, either repair or replace the defect, or
replace the defective product or part thereof at no charge to the owner for parts
and labor covered by this warranty. If a unit is examined which is not in need
of repair, you will be charged for the examination and return shipping.
You must pay shipping charges incurred in getting your product to the
factory. We will pay the return shipping charges if the repairs are covered by
the warranty. Please save the original shipping carton. A charge will be made
for an additional carton.
If your product needs service, you should notify us at:
SERVICE DEPARTMENT
DWIN Electronics, Inc.
710 North Mariposa Street, Burbank CA 91506
Tel:
( 818 ) 239–1500,
Fax:
( 818 ) 239–1506
E-mail:
Info@DWIN.com
NOTE: You will need to present the original bill of sale to establish the
date of purchase.
Limited 90-Day Warranty – Projector Lamps
TransVision
™
4 lamps are rated for up to 2,000 hours of use during which the
lamp brightness may drop to 50 percent of the original brightness.
Actual projector lamp service life varies greatly depending upon several
factors such as duration of each projector session, frequency of on/off switch-
ing, environmental conditions, presence of adequate projector ventilation, etc.
The specified 2000 hour lamp life rating is not guranteed in any way.
DWIN warrants its projector lamps for 90 days from the original date of
consumer purchase.
DWIN Electronics shall not be liable or in any way responsible for any inci-
dental or consequential damages of any kind.
This warranty covers all defects in lamp material and workmanship for 90
days from the date of lamp or projector purchase with the following specific
exceptions. These are:
• damage caused by improper installation or adjustment;
• damage caused by accident, unreasonable use or neglect, specifically
if a projector is overheated due to an improperly ventilated cabinet or
secondary enclosure;
• damage from failure to follow instructions contained in your operating
instructions;
• damage from the performance of repairs by someone not authorized by
DWIN Electronics;
• any unit on which the serial number has been effaced, modified, or
removed;
• any failed lamp with a serial number that does not match the serial number
associated with the projector