Installation -
Installation Using Mounting Bolts and Nuts
10
1. Using the mounting template for the nuts and
bolts installation, mark and drill the necessary
holes in the wall or ceiling.
2. Pass the wires through and make all necessary
connections. See page 12 for more information.
3. Secure the two long mounting screws to the
camera’s base.
4. Mount the camera to the
mounting surface using
the 2 mounting nuts.
5. Rotate the locking
discs over the screws
until the camera is
held tightly from the
mounting surface.
6. Adjust the camera’s lens
position to the necessary
angle. the camera’s max tilting angle is 75°.
7. Assemble the dome cover over the camera body.
Be sure to assemble the dome and bottom case
to match the case outline.
8. When the installation is completed, remove the
protective film.