Installing and Connecting the Unit
13
To set the unit’s video standard via its web interface
1.
Enter the IP address of the unit in a browser. The unit’s logon window opens.
2.
Login to the unit by entering your user name and password. The default user name and
password are both “admin”. The web interface opens.
3.
From the Live View window, access the Camera Setup by clicking
Setup > Camera > Streaming
.
The
Streaming
window opens.
Figure 10: Web Interface Streaming Window
4.
In the Video Standard field, select the video standard (PAL or NTSC).
5.
Click
Apply
to save the setting.
Note:
1.
If the video standard is changed, all analytic settings will be deleted.
2.
Ensure that the camera and other equipment support the same video standard
(PAL/NTSC).
3.2.8
Connecting the Unit to Receive Alarms from External Devices (Alarm Input)
The mmp100dn can receive alarms from external devices such as sensors and doors, enabling it to trigger
automatic responses. The unit supports a single alarm input from external devices. The alarm input includes
two dry terminal contacts as shown in Figure 3: mmp100dn Back Panel (page 3).
Warning:
1.
Only dry contacts can be connected to the unit’s alarm input terminals.
2.
Disconnect power from the unit before performing the following procedure.