Camera Dimensions, Settings and Wiring
7
3.3.1
Power Connector
The power output cable from the camera is supplied with a 3-pin power connector. Be sure that the
wires are properly inserted in the connector according to the following pin-out:
To power-up the camera
1.
Attach the connector a 3-pin female connector on the power supply.
2.
Connect the power supply to the mains.
3.3.2
Video Output
The camera’s System Cable includes a 75-ohm coaxial cable with a BNC connector that attaches the
camera’s video output to the encoder’s video input.
To connect the IOI-XTRK-100D encoder to the camera’s video output
1.
Attach a 75Ω coax cable with female BNC connectors to the VIDEO IN connector on the
encoder front panel.
2.
Attach the other end of the cable to the male BNC connector on the System Cable.
3.3.3
RS-485 Control Line Connection to the Encoder
The camera communicates with the IOI-XTRK-10D or IOI-XTRK-100D encoder via an RS-485
connection. Refer to the
IOI-XTRK-10D Installation Manual
or
IOI-XTRK-100D Installation Manual
for
instructions how to connect the camera’s RS-485 control lines to the encoder.
Pin Definition
1
AC 24-
2
Ground
3
AC 24+
Содержание ioimage CP-2202-361P/N
Страница 2: ......
