Adjusting the Fan Speed
Your system has been configured so the airflow and settings are individually calibrated to the size
of your home and will run at these settings automatically. However, you are able to easily fine tune
the fan speed to optimise condensation or climate control to better suit your needs.
Fan speed tuning allows you to adjust the fan speed to a level higher or lower than the pre-set
calibrated level (represented by the ‘0%’ setting).
To adjust the fan speed:
• Press the Menu button briefly.
• Use the down arrow to select Fan settings and press OK.
• Use the down arrow to select Fan speed and press OK.
• Use the up or down arrow to change the fan speed (from -50% to +50%).
• Press OK to confirm the fan speed.
• Press the Menu button repeatedly until you return to the Main Screen.
Automatic Summer Bypass (optional extra)
The purpose of an Automatic Summer Bypass is to deliver a continuous supply of fresh filtered air
from outside by automatically changing the air source to draw directly from the external vent and
bypassing the heat exchanger.
This function will automatically activate once the house temperature exceeds the set bypass
temperature and the incoming air is cooler. System fan speed will automatically increase.
To set the bypass temperature:
• Press the Menu button briefly.
• Use the down arrow to select Bypass Temp and press OK.
• Use the up and down arrows to select the temperature, recommended
temperature 25 degrees or over).
• Press OK to confirm your selection, then press the Menu button repeatedly
until you return to the Main Screen.
The bypass indicator will appear on the main screen once activated.
Note: This is an optional extra and will not appear on the control panel unless
installed.
Page 6
Fan Speed
Allows you to fine tune
the fan speed to your
house and climate
+50%
0%
-50%
Bypass mode
DVS Reclaim
26
o
Bypass Temp
25
o