DVDO Matrix
44
TM
3
6.
OPERATION CONTROLS AND FUNCTIONS
6.1
Front Panel
1
POWER: Press this button to turn ON the device and the LED will
illuminated.
2
IR Window: This IR Receiver receives the remote control signal from
the package include remote control only.
3
IN 1~4: Press these IN buttons to select an input from the 4 input
sources.
4
OUT A/D: Press these buttons once a time along with an IN buttons
to select an input source for an output display. i.e. OUT A→
IN1→TAKE or OUT B→ IN4→TAKE.
5
GO: Press this button to confirm the selection of an IN and an OUT
button.
6
CANCEL: Press this button to cancel the IN/OUT selection.
7
ENTER: Press to confirm the selection.
8
MENU: Press to enter into the menu.
9
+/-: Press these buttons to move up/down under menu selection.
10
PRESET: Press “PRESET”, the OLED menu will show Preset then select
IN 1~4. Preset 1~4 after the selection, press “TAKE” to confirm the
selection or press “CANCEL” to cancel the selection.
11
All: Press this button to select all outputs to display with an input
source.
12
MODE: TAKE Mode/R.T.(Real Time) mode switch.
13
LOCK: Press this button to lock all button functions on the panel.
Press 3 seconds to relieve the lock function.
14
Display: Displaying Input and Outputs selection and menu selection.
14
11
9
8
5
5
2
1 2 3 5 7 10 12
4
6 8 9
11 13
14
