DVDO Controller-1, Руководство пользователя

Страница: 5 / 16

5
DVDO-Controller-1_V1.0.0
DVDO
DVDO-Controller-1 HDMI In-line Controller User Manual
Introduction
DVDO-Controller-1 is an HDMI in-line controller which supports resolutions up to
4K@60Hz (chroma sub-sampling 4:4:4 8-bit) and HDCP 2.2.
Its digital or analog audio output allows audio to be de-embedded from HDMI
input and sent to audio distribution system, such as AVR or Zone Amplifier. Its
rotary EDID switch has 15 EDID presets and can help negotiate the HDMI
handshake in certain situations, such as an old HDMI display with DDC channel
invalid, or DVI display with audio amplified requirement.
By auto-detecting input signal status, it could automatically trigger CEC
commands to turn on or off TV with CEC support, pre-loaded RS232 commands
to power on or standby projector, and to turn on or off projection screen through
relay control.
Features

Supports video resolutions up to 4K@60Hz 4:4:4 8-bit and HDCP 2.2.

HDMI audio de-embedded out with digital coaxial and analog stereo.

Rotary switch for EDID management with 15 EDID presets.

Built-in CEC controller from HDMI out.

Built-in RS232 controller to pre-load and store RS232 command of sink
device.
Key Benefits

Automatic CEC/RS232 commands to power on/standby display device by
detecting input signal status.

Built-in relay control to automatically turn projector screen on/off by
detecting input signal status.

Automatic input cable equalization and signal regeneration compensation.