DVC DigitEyes Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 66

DVC DigitEyes Series Скачать руководство пользователя страница 39

34

to a DVC-08 or a DVC-10 for a nominal upgrade fee (in addition to the difference in the list price
of the two models). This enables the user to purchase a camera that will "grow" with his system.
No other changes in the power supply, optics or system design are required. Of course, a digital
interface cable will be required to use the digital video output.

8.1.4 What kind of a warranty is available on DVC products?

A two year warranty is available on all DVC products. See the “Warranty” section of this manual
for details !

8.1.5 Are your cameras available in board form for OEM applications?

Yes. All three models (DVC-0A, DVC-08 and DVC-10) are available in board form.
The DVC-0A board set consists of two boards:

The sensor and video board (3" X 4")
The sync and power board (3" X 4")

The DVC-08 and the DVC-10 board sets consist of the above two boards and an Analog-to-
Digital board. The DVC-08 board set uses the AD-08 (eight bit) board; the DVC-10 board set
uses the AD-10 (ten bit) board. The dimensions of both AD-08 and AD-10 boards are 3" X 1.5";
the dimensions of the combined board set using all three boards (DVC-08 or DVC-10 models) is
3" X 4" X 1.5"

An optical plate is also available with a C-mount lens adaptor for all three board sets.

This is intended for OEM applications in which the camera electronics are inside the OEM's
enclosure. The upgrade policy that applies to standard cameras also applies to board level
products.

Please call DVC for details about the board level products !

8.2 SYSTEM ISSUES

8.2.1 What is the minimum system configuration I need to use DVC cameras?

To use a DVC camera you need the following:

•

C-mount lens (usually not supplied)

•

Camera power supply with DIN connector (usually supplied, available in wall mount or table-
top versions, both for the 115V, 60 Hz and the 220V, 50 Hz standards)

•

Monochrome RS-170 Video monitor

•

Co-axial cable (75

Ω

) between the camera BNC connector and the monitor or Image

Processor.

•

Interface cable (optional for DVC-0A, mandatory for DVC-08 and DVC-10)

«
...
37
38
39
40
41
...
»

Содержание DigitEyes Series



































































Отзывы:

Нет отзывов