manualshive.com logo in svg

DVC DigitEyes Series, Техническое руководство, Страница: 11 / 66

Поделиться
Скачать
DVC DigitEyes Series Скачать руководство пользователя страница 11

6

4.  TC-245 CCD Details

Note: This information has been derived from the Texas Instruments Databook Titled "Area Array
Image Sensor Products". 

Texas Instruments 1994

• 

Frame Transfer CCD Technology. Contiguous pixels for 100% fill factor. No "dead space"
between pixels.

• 

755 (H)  X 242 (V) active picture elements per field.

• 

Interlaced operation doubles effective vertical resolution; Image format is 755(H) X 484(V)

• 

8.5

µ

m (H)  X  19.75

µ

m (V) pixel size.

• 

On-chip correlated-clamp sample & hold circuits to minimize noise.

• 

On-chip shielded pixels provide "dark pixel" level for black level reference.

• 

8 mm. image diagonal, compatible with ½ " optics.

• 

High sensitivity; unlike Interline Transfer CCDs which have "dead spaces" that lower
sensitivity.

• 

Solid state reliability with no image burn-in, residual imaging, image distortion, lag or
microphonics

• 

Minimum 100:1 blooming overload ratio (with Interlace on).

• 

70 dB sensor dynamic range. Full well >80,000 electrons; Noise equivalent signal <30
electrons (typical 20 electrons)

• 

High photo-response uniformity; <5% photo-response-non-uniformity guaranteed (typical
<2%); blemish free sensor.

4.1  TC-245 CCD Functional Details

The TC-245 is a frame transfer charge coupled device (CCD) image sensor designed for use in
single chip B/W NTSC TV applications. The device is intended to replace a 1/2 inch vidicon tube
in applications requiring small size, high reliability and low cost.

Figure 4-1: TC-245 Block Diagram (

 Texas Instruments, 1994)

Содержание DigitEyes Series



































































Отзывы:

Нет отзывов