DV Systems IS13-5530 Скачать руководство пользователя страница 15

SDIG 

Feb ‘15 

 

- 15 -

DV Systems Limited Warranty 

Standard Duty Industrial Air Compressors 

 
 

Subject to the terms and conditions contained herein, DV Systems Inc. (the “Manufacturer”) warrants that the Air Compressor (the “Product”) 
shall be free of defects in material and workmanship (the “Warranty”) for a period of two (2) years from the date of purchase, not to exceed 
thirty (30) months from the date of manufacture (the “Warranty Period”).   This Warranty is subject to the following terms and conditions: 

  when in use, the Product must be properly installed, operated, applied and maintained in accordance with procedures and 

recommendations outlined in the Manufacturer's instruction manuals; 

  all claims under this Warranty must be brought to the attention of the Manufacturer within the Warranty Period;  

  the Warranty shall continue to apply to any Product or part of the Product replaced or repaired under the Warranty for the remaining 

term of the Warranty Period as would have been applicable to the original Product or part of the Product;  

  this Warranty is applicable to the original purchaser of the Product and is not transferable;  

  this Warranty does not apply to a Product that is purchased outside Canada or the continental United States (the “Territory”); and 

  any service on the Product must be performed by the Manufacturer or, if by another party, only with the prior written authorization of 

the Manufacturer. 

 
If there is a defect in the material or workmanship of the Product to which the Warranty applies, the Manufacturer will repair or replace the 
Product or part of the Product determined to be defective by the Manufacturer, in its sole and reasonable discretion.  This Warranty applies 
only to parts and labour necessary to correct a defect in the Product. 
 
This Warranty shall be deemed void if: 

  any service on the Product is performed by any party other than the Manufacturer or his agent  without the prior written authorization of 

the Manufacturer; 

  the Product is not properly maintained as detailed in the Manufacturer's instruction manuals; or 

  the Product is subject to misapplication, misuse, abuse, neglect, incorrect maintenance or accident. 

 
This Product is subject to ordinary wear and tear (“Ordinary Wear and Tear”), which particularly applies to parts that are subjected to friction or 
that may generally have a known useful life (including but not limited to compressor pump rings, valves and bearings).  The Manufacturer shall 
determine, in its sole and reasonable discretion, if a Product or part of a Product has been subject to Ordinary Wear and Tear. This Warranty 
does not apply to Ordinary Wear and Tear.  In addition, without limiting the foregoing, this Warranty does not apply to: 

  all shipping and handling charges  

  compressor pumps using other than the recommended compressor pump lubricant; 

  costs of removal, replacement, or repair of Product without previous authorization from Manufacturer; 

  expenses incurred by a technician of the Manufacturer for travel or lodging; 

  damages resulting from transportation, installation, or servicing; 

  products, parts, materials, components or accessories manufactured by parties other than the Manufacturer or supplied in connection 

with the sale of the Manufacturer's Product; and 

  the cost of rental or loaner equipment provided to the customer while the Product is being assessed, repaired, or replaced. 

 
To the maximum extent permitted by state, provincial or federal law, this warranty is in lieu of all other warranties, expressed or implied, 
including the implied warranties of merchantability and fitness for a particular purpose. In some jurisdictions, the duration of implied warranties 
is hereby expressly limited to the duration of the express warranty stated above.   
 
To the maximum extent permitted by state, provincial, or federal law, in no event, whether as a result of breach of warranty or contract, tort 
(including negligence) strict liability or otherwise, shall the manufacturer be liable for indirect, special, incidental, or consequential damages, 
including but not limited to loss of use of the product or associated equipment, lost revenues or profits or cost of substitute equipment relating 
to or arising out of the use of the product or a claim under this warranty howsoever caused. 
 
In order to make a claim under this Warranty, the customer must first call DV Systems Warranty Department at the number shown on this 
warranty.  
 
All returns must be pre-authorized, returned 'Freight Prepaid', and accompanied by a 'Return Authorization (RA) Number'.  All decisions made 
by the Manufacturer with regard to this Warranty shall be final. The Manufacturer will not be responsible for any claimed defective materials 
returned other than in accordance with this statement of policy or without its prior written authorization. 

 
 
 
 
 

 
 

 

 

 

 

 

 

© Copyright DV Systems Inc. 2014 

Printed in Canada 

DV Systems Inc. - Canada 
490 Welham Road 
Barrie, ON 
L4N 8Z4 
Tele: 

(705) 728-5657 

Fax: 

(705) 728-4974 

 

DV Systems Ltd. - US 
128-B Talbert Road 
Mooresville, NC 
28117 
Tele: 

(704) 799-0046 

Fax: 

(704) 799-0355 

 

Содержание IS13-5530
















Отзывы: