DUVLAN loki DVL2011, Руководство пользователя

Страница: 33 / 45

STEP 4:
1. Attach the Press Bar (9) to the Upper Cross Beam (6), using one Shaft (72), two M16 Washers
(86) and two M16 Nylon Nuts (92).
2. Remove one M16 Nylon Nut (92) and one M16 Washer (86) from the Right Butterfly Arm (10).
3. Attach the Right Butterfly Arm (10) to the Press Bar (9), using two Oil Bushings (51), one M16
Washer (86) and one M16 Nylon Nut (92).
4. Slide the Arm Foam Roller (36) onto the Right Butterfly Arm (10). Slide the Mid-empty Square
Plug (□38X
￠
26) (68) and the Handle Grip (70) onto the Right Butterfly Arm (10).
5. Remove one M10X20mm Hex Bolt (79) and one M10 Washer (88) from the Handle Tube (Short)
(19).
6. Attach the Handle Tube (Short) (19) to the Right Butterfly Arm (10), using one M10X20mm Hex
Bolt (79) and one M10 Washer (88).
7. Assembly the Left Butterfly Arm (11) with same method.
8. Attach the Tobacco-pipe (49) to the Support Frame (5), using one M8X40mm Hex Bolt (82),
two M8 Washers (90) and one M10 Nylon Nut (96).
9. Slide the Washer(
￠
30X
￠
10) (89) and the Plum Blossom Nut (46) onto the Tobacco-pipe (49).
10. Attach two Stabilizer Brackets (24) to the Back Base Frame (3) and the Back Support Frame
(4), using two M10X75mm Hex Bolts (74), four M10 Washers (88) and two M10 Nylon Nuts (94).
33
EN