26
Dutchwest
®
Non-Catalytic Convection Heater
30002278
helpful) and vacuum away ash using a lexible vacu-
um hose inserted into each passage. Care should be
taken not to damage the white ibrous material in this
rear chamber. (Fig. 35)
The Chimney Connector
TWO WEEKS:
•
Inspect the chimney connector and chimney. Clean if
necessary.
TWO MONTHS:
•
Inspect the chimney and chimney connector. Pay
particular attention to the horizontal runs of chimney
connector, and the elbows. Clean the system if nec-
essary.
ANNUAL SPRING CLEANING:
•
Disassemble the chimney connector and take it
outdoors for inspection and cleaning. Replace weak
sections of connector.
•
Inspect the chimney for signs of deterioration. Re-
pairs to a masonry chimney should be made by a
professional mason. Replace damaged sections of
prefabricated chimney. Your local Dutchwest dealer
or a chimney sweep can help determine when re-
placement is necessary.
•
Thoroughly clean the chimney.
Inspect and
Vacuum Both
Rear Corners
Ash Build-Up
ST876
Fig. 35
Inspect and clean out ash accumulation on either
side of the non-catalytic combustion system.
