3
EN
Cleaning:
• Before cleaning the device, always disconnect the
device from the charging cable.
• Do not use abrasive cleaning solvents to clean
the device.
• Clean the exterior of the device with a damp cloth.
3) INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out
the device. Make sure the device is complete
and undamaged. If any components are missing
or damaged, contact the vendor and do not use
the product. Retain the packaging or recycle it in
accordance with local regulations.
Location of the control buttons
A. Power On/Off
B. Previous track
C. Next track
D. Volume up
E. Volume down
F. Play/pause
G. Voice change effect
H. Microphone volume
I. Remix
J. TF / Micro SD card slot
K. USB in port
L. AUX out port
M. Micro USB charging / AUX in port
N. LED indicator
O. LED charging indicator
Charging the device:
• Carefully plug the micro USB connector of the
charging cable into the micro USB charging port
(M)
of the device.
• Plug the USB connector of the charging cable into a
USB port on your computer or USB charger.
• The LED charging indicator
(O)
lights up red when
the device is charging.
• Once charging is completed, the LED charging
indicator
(O)
will no longer light up and the device
will automatically stop charging.
• Unplug the charging cable from the device, which is
now ready for use.
• If the battery level is low, you will hear two beeps
every 10 seconds, indicating that the battery needs
to be recharged.
Powering the device ON/OFF:
• To power on the device, press the power On/Off
button
(A)
for ± 3 seconds.
• Once powered on you will hear a ‘tone’, and the LED
indicator
(N)
flashes blue.
• To power off the device: press the power On/Off
button
(A)
for ± 3 seconds, you will hear a ‘tone’.
Making a BT connection (BT pairing):
• Power on the device, pressing the power On/Off
button
(A)
for ± 3 seconds. Once powered on, a
‘tone’ will sound, and the LED indicator
(N)
flashes
blue, indicating it is in pairing mode.
• Keep the device and your mobile phone, tablet or
other BT enabled appliance within 1 m (3 ft) of each
other during the BT pairing process.
PREV
Play/Pause
VOL+
VOL-
MIC VOL
REMIX
VOICE
NEXT
N
A
O
M
L
K
J
B
F
D
C
H
G
E
I
