Dustcontrol DC 38800a, Инструкция пользователя

Страница: 11 / 29

DC 3800a - 11 Art Nr 9467
Trouble shooting
Problem Fault Solution
Motor will not start. Machine not connected. Make sure connection.
The motor stops directly Incorrect fuse. Change to correct circuit.
after starting. Thermal overload not set Electrician should adjust.
correctly.
Pump runs but no suction. Hose not connected. Connect the hose.
Hose plugged. Find and remove block.
The container is not fi rmly Secure the container.
attached to the bottom of
the cyclone.
Pump runs but poor suction. Hole in the hose. Change or repair hose.
Plugged fi lter. Clean or change fi lter.
Hose too long or too small. Change the hose.
Hose is kinked. Check and free.
Machine top is mounted Adjust the mounting.
incorrectly.
Dust is packed in the Take off the top and clean
cyclone. out.
One of the fans is turned Start it.
off .
Machine blows dust. Filter is perforated or has Check the fi lters and change
come loose. if necessary.
Abnormal sound from Order service.
machine.
ENGLISH
The warranty period for this machine is two years
and covers manufacturers faults. The warranty is
valid under the condition that the machine is used
under normal conditions on the task for which it was
designed and is maintained properly. Normal wear is
not covered by this warranty.
Warranty
Service performed by other than Dustcontrol or its
authorized agent voids automatically the warranty.
No other warranty express or implied is applicable.