Dustbane Gladiator 1050 Ride-On, Руководство по эксплуатации, Страница: 7 / 28

7
ENGLISH
Emptying The Waste Bin
1) Move to the waste container.
2) Pull lever that locks/releases the bin.
3) Pull out the bin and empty it.
4) Refit the bin and lock it in place with lever
Cleaning And Servicing The Filter
The filter is a very important component of the machine and essential for correct operation. Proper filter maintenance will allow you
to obtain the best performance from your machine. The filter can be cleaned in any of the following three ways:
1) By means of the automatic cleaning system: According to the chosen work programme, the machine is programmed to
automatically clean the filter at regular preset intervals.
2) By means of an electric filter shaker that is manually started: Just a simple command is needed to keep the filter in perfect
working order: press the button marked ‘F’ and hold it down for a few seconds. Repeat this operation 4 or 5 times. Remember
that the cleaner the filter, the better the results of your cleaning session. It is recommended to carry this operation out at the
end of each work cycle.
NOTE: Dusty environments. If you are using the machine in a dusty environment (e.g. sawmills – warehouses where haulage vehicles pass,
etc.), it is a good idea to use the filter shaker more frequently.
3)
By manually cleaning the filter: If operating the filter shaker is not enough to keep the filter clean - and in any case every 20
hours of work - clean the filter manually. Before carrying out any kind of intervention on the machine, make sure it is turned off
and that all functions are deactivated. To obtain this condition, turn the switch marked ‘L’ to OFF.
1.
Remove the rear box from the machine
2.
Take the filter out of its seat by turning the two fixing handles.
3.
Blow compressed air onto the side of the filter featuring the protective net (at a pressure of 6 bar at the most).
4.
Refit the filters and the rear panel.