10
Operations Manual
Gladiator 464/664
Side brush replacement
•
Raise the front part of the machine.
•
Press in the 2 tabs (indicated by the arrows) and pull off the brushes,
•
Slide the new brush until it locks into place.
Main brush replacement
•
Tilt the machine backwards until the handle is touching the ground and the main brush is easily reached.
•
Manually turn the brush until a black button is seen on the right hand side of the brush core.
•
Press the button and push to dis-engage the brush.
•
Insert the new brush following the guide.
CLEANING AND SERVICING THE FILTERS
! INFORMATION: The filters are very important components of the machine and essential for correct operation. Proper filter maintenance
will allow you to obtain the best performance from your machine.
Pre-Filter
!INFORMATION:
Clean daily.
•
Remove the debris hopper to access the pre-filter.
•
Release the two metal retaining clip arms that secure the pre-filter in place. Hinge the retaining clip arms outward and
remove the pre-filter.
•
Shake the pre-filter into a debris receptacle.
•
Replace the pre-filter and secure with retainer clips.
