Durr EcoGun AS MAN 1AF, Руководство по эксплуатации, Страница: 6 / 36

2.4 Personal protective equipment
When working in explosive areas, the pro-
tective clothing, including gloves, must meet
the requirements of DIN EN 1149-5. The
insulation resistor must not exceed 100 M Ω .
Footwear must meet the requirements of EN
ISO 20344. The insulation resistor must not
exceed 100 M Ω .
Wear the specified personal protective
equipment when working. Provide the fol-
lowing personal protective equipment:
2.5 Residual risks
Explosion
Sparks, open flames and hot surfaces can
cause explosions in explosive atmospheres.
Serious injuries and death can be the conse-
quence.
Perform all maintenance away from
explosive atmospheres.
Do not use any sources of ignition and
open light.
Do not smoke.
Ground the product.
Ground the work piece.
Only use conductive lines.
Use compressed air quick couplings
exclusively for water-based materials.
Flammable materials can cause a fire or an
explosion.
Ensure that the flashpoint of the cleaning
agent is at least 5 K above the ambient
temperature.
Pay attention to the explosion group of
the material, cleaning agent and rinsing
agent.
Ensure that forced ventilation and fire
protection equipment are in operation.
Do not use any sources of ignition and
open light.
Do not smoke.
Follow safety data sheets.
Danger from harmful or irritant sub-
stances
If you come in contact with hazardous sub-
stances or vapors, it can cause serious
injury or death can result.
Ensure that the forced ventilation is
operational.
Follow safety data sheets.
Wear specified protective equipment.
Pressure
Material can escape with high pressure and
penetrate the body. Death or serious injuries
may result.
Before working on the product:
Disconnect the system with the product
from compressed air and material supply.
Secure the system against being
switched on again.
Relieve the lines.
Noise
The noise during normal operation may
cause severe hearing damage.
Wear hearing protection.
Do not spend more time then necessary
in the work area.
Hot surfaces
During normal operation the surfaces of
components can get extremely hot. Contact
with it can cause burns.
Before carrying out any work:
Check the temperature.
Do not touch hot surfaces.
Let components cool down.
Wear protective gloves.
Safety
11/2017 EcoGun AS MAN 1AF - MSG00020EN 6/36