Durr EcoGun AS MAN 1AF, Руководство по эксплуатации, Страница: 16 / 36

Clean filter of the flow cup.
Protective equipment:
Protective workwear
Protective gloves
For a thorough cleaning, you need to
remove the filter screen.
Disassembly
Fig. 11: Clean filter screen
1. Pull out filter screen (1) by the holding pin
from the connector.
2. Clean the filter screen (1) in the cleaning
bath.
3. Insert filter screen (1) in the connector
and push down until it sits firmly.
Clean air cap, nozzle and needle.
Protective equipment:
Protective workwear
Protective gloves
For a thorough cleaning you need to remove
the air cap, nozzle and needle.
Disassembly
Fig. 12: Disassemble air cap, nozzle and
needle
1. Loosen the cap nut (2).
2. Remove the air cap (1).
3. Push trigger (5) through. Keep it pressed.
ð The needle (4) is pushed backwards
so that it will not be damaged during
disassembly of the nozzle (3).
4. Unscrew and remove nozzle (3) using
monkey wrench.
5. Release trigger lever (5).
6. Unscrew and remove set screw (7) and
locknut (6). Remove with needle spring
and bearing.
7. Clean air cap (1) using cleaning agent
and cleaning brush.
8. Dry cleaned air cap (1) using compressed
air (at max. 2 bar).
9. Clean the nozzle in the cleaning bath
using a soft brush.
Cleaning and maintenance
11/2017 EcoGun AS MAN 1AF - MSG00020EN 16/36