Durr EcoGun AA MAN 2 P Скачать руководство пользователя страница 8

Страница: 8 / 46

Operating Manual

EcoGun AA MAN 2 P

Chyba! Pomocí karty Domů použijte u textu, který se má zde
zobrazit, styl Überschrift 1.

Version: 01



as of: 09/2014

8 / 46

1.2

Intended Use

Pneumatically operated paint spray gun with pump support in the

high pressure range (up to max. 250 bar) for processing liquid,

sprayable media with consideration of the manufacturer references.

The high pressure spray gun is led by hand and operated by the

operator to coat the work piece.

Installations where the spray gun is operated must meet the
applicable national and international safety regulations.

The spray gun is suitable for the operation in zone 1, protection class
II 2 G IIA T6.

The spray gun may only be operated in the range of application
intended by Dürr Systems GmbH.

The spray gun may only be operated with components that are suited
for the operation with the systems and have been authorized by
Dürr Systems GmbH.

The spray gun must not be equipped and operated with components
of other manufacturers if their use was not clarified explicitly with Dürr
Systems GmbH.

In case of questions on the range of application, our "Service"
department will be glad to inform you.

Pos: 4 /CCP/SG_EcoGun/Übergreife nd/0201 Nicht best. Ve rwendung @ 31\mod_1389870550754_20.do cx @ 414229 @ 2 @ 1

1.3

Reasonably foreseeable misuse

The atomizer must only be used as described.

Any other use is not

approved by Dürr Systems.

- Do not spray any material on people or animals.
- Never spray liquid nitrogen.

Pos: 5 /CCP/SG_EcoGun/Übergreife nd/0102 Weite rführende Doku @ 31\mod_1389961783915_20.do cx @ 414551 @ 2 @ 1

Содержание EcoGun AA MAN 2 P















































Результаты поиска

Содержание EcoGun AA MAN 2 P

Отзывы:

Бренды по названию

Популярные бренды

Durr EcoGun AA MAN 2 P, Руководство по эксплуатации

Результаты поиска

Содержание EcoGun AA MAN 2 P

Отзывы:

Бренды по названию

Популярные бренды