Dürr Technik 1015100001, Инструкция по установке и эксплуатации

Страница: 6 / 24

4
1015100100L02 1910V003
Important information
WARNING
Risk of explosion of the pressure
vessel and pressure hoses
The unit is pressurised and may explode
if you do not comply with the notice.
i
The pressure vessel and the pressure
hoses must be vented before they are
stored or transported.
i
Protect the unit from moisture during
transportation.
i
Always transport the unit in an upright
position.
Dürr Technik accepts no liability for dam-
age resulting from the use of non-ap-
proved accessories, special accessories
or any working parts or spare parts other
than original parts.
The use of non-approved accessories,
special accessories or non-genuine
working parts / spare parts (e.g. power
cord) can have a negative effect on the
electrical safety and EMC.
2.10 Transportation and storage
The original packaging provides optimum pro-
tection for the unit during transport.
Dürr Technik will not accept any respon-
sibility or liability for damage occurring
during transport due to the use of incor-
rect packaging, even where the unit is
still under guarantee.
– Only transport the unit in its original packag-
ing.
– Keep the packing materials out of the reach
of children.
The unit may be stored in its original packaging
– in warm, dry and dust-free rooms;
– protected from contaminants.
If possible, retain the packaging material.
2.5 Specialist personnel
Operation
Unit operators must ensure safe and correct
handling based on their training and knowledge.
i
Instruct or have every operator instructed in
the handling of the unit.
Installation and repairs
i
Always arrange for any assembly work, read-
justments, alterations, extensions, and repairs
to be performed by Dürr Technik or by per-
sonnel authorised and trained by Dürr Tech-
nik. Qualified personnel are defined as those
trained by Dürr Technik; who are familiar with
the unit technology; and are aware of the dan-
gers presented by the unit.
2.6 Electrical safety
i
Observe and comply with all the relevant elec-
trical safety regulations when working on the
unit.
i
Replace any damaged cables or plugs imme-
diately.
2.7 Essential performance charac-
teristics
The SICOLAB mini ENDO unit does not have
any essential performance characteristics in ac-
cordance with EN/IEC 60601-1 section 4.3.
The unit complies with the requirements accord-
ing to IEC 60601-1-2:2014.
2.8 Notification requirement of seri-
ous incidents
The operator/patient is required to report any
serious incident that occurs in connection with
the device to the manufacturer and to the com-
petent authority of the Member State in which
the operator and/or patient is established/resi-
dent.
2.9 Only use original parts
i
Only use accessories and special accessories
that are specified or approved by Dürr Tech-
nik.
i
Only use original working and spare parts.
EN