Duronic RCD144, Руководство по эксплуатации, Страница: 6 / 9

E-9 E-10
HOW TO PLAY MP3 DISCS
- INSERT A MP3 CD DISC, CLOSE THE DOOR.
- PRESS THE KEY TO SELECT "CD".
- THE DISK WILL SPIN AND PERFORM A FULL CHECK OF THE DISC TO COUNT
THE TOTAL NUMBER OF SONGS.
- PRESS THE PLAY/ PAUSE KEY THEN PLAYBACK OF THE FIRST SONG (TRACK)
WILL BEGIN AND THE DISPLAY WILL INDICATE THE CURRENT TRACK NO: (001).
- AT ANY TIME DURING PLAYBACK, PRESS AND RELEASE TUNE DOWN OR
TUNE UP TO SKIP BACKWARDS OR FORWARDS BY ONE TRACK.
- MP3 DISCS OFTEN HAVE "FOLDER" (SUB-DIRECTORIES) WHICH CONTAIN
GROUPS OF SONGS.
- IF YOUR MP3-CD HAS FOLDERS, YOU CAN USE THE OR
KEY AS DESIRED. THIS IS USEFUL IF YOU HAVE MANY SONGS AND YOU WANT
TO QUICKLY JUMP TO A PARTICULAR SONG.
- PRESS & HOLD
FOR 3 SECONDS,
AND THEN PRESS OR
KEY SEVERAL TIMES UNTIL YOU REACH A SONG NUMBER NEAR TO YOUR
DESIRED SONG.
PRESS TUNE DOWN OR TUNE UP REPEATEDLY TO ARRIVE AND THE
EXACT SONG YOU DESIRE.
(NOTE: THE "FOLDER" FUNCTION ONLY WORKS ON MP3-DISCS WHICH HAVE
FOLDERS.)
FOLDER -
FOLDER -
USB- & SD-CARD MP3 PLAYBACK DRIVE
- THIS UNIT IS EQUIPPED WITH A USB SOCKET WHICH CAN ACCEPT AND PLAY MP3
FILES STORED ON STANDARD USB FLASH DRIVES (ALSO KNOWN AS "PEN DRIVES")
WHICH ARE FOR MEMORY STORAGE. (COMPATIBLE WITH USB VERSION 1.1 & 2.0).
- THIS UNIT ALSO HAS A BUILT-IN SD-CARD SOCKET WHICH CAN ACCEPT AND PLAY
MP3 FILES STORED ON STANDARD "SD" TYPE FLASH MEMORY CARDS
(OF MAXIMUM CAPACITY = 4 GB) WHICH ARE COMMONLY AVAILABLE.
- TO UTILIZE THIS FACILITY, FIRST INSERT EITHER A USB-DRIVE OR AN SD-CARD INTO
THE CORRECT SLOT (PORT).
- PRESS THE FUNCTION KEY REPEATEDLY UNTIL THE DISPLAY SHOWS "SD" OR
"USB".
- AFTER ABOUT 5-10 SECONDS THE DISPLAY WILL INDICATE THE NUMBER OF MP3
SONGS , AND ALSO THE NUMBER OF FOLDERS ON THE DEVICE.
-
PRESS & HOLD FOR 3 SECONDS,
AND THEN PRESS THE
OR KEY REPEATEDLY TO SELECT THE DESIRED FOLDER NUMBER.
FUNCTION
FOLDER -
- PRESS TUNE DOWN OR TUNE UP TO SKIP FORWARD OR BACKWARDS TO
SELECT THE DESIRED MP3 FILE IN THE SELECTED FOLDER.
- PRESS PLAY/ PAUSE TO START PLAY BACK OF THE SELECTED SONG.
- ALL FUNCTIONS FOR USB-DRIVE & SD-CARD MP3 PLAYBACK ARE EXACTLY THE
SAME AS IN CD-MP3 MODE (AS PREVIOUSLY DESCRIBED).
NOTE
THIS UNIT SUPPORTS UP TO MAXIMUM MEMORY SIZE OF 4 GB USB FLASH DRIVE &
SD CARD.
A SMALL PERCENTAGE (ABOUT 5%) OF USB FLASH DRIVES MIGHT NOT BE
READABLE, DUE TO THOSE USB-DRIVE MANUFACTURERS NON-COMPLIANCE
WITH THE FULL (OFFICIAL) USB 1.1 / 2.0 STANDARDS.
ALTHOUGH THIS PRODUCT IS FULLY COMPATIBLE WITH USB 1.1 & 2.0 STANDARDS,
NOTE:
THE READING TIME FOR A USB-DRIVE OR SD-CARD VARIES DEPENDING ON THE
SPEED OF THE MEMORY DEVICE AND THE NUMBER OF SONGS AND FOLDERS.
IN SOME CASES THE READING TIME MAY BE AS LONG AS 60 SECONDS.
ALWAYS SWITCH OFF THE UNIT OR CHANGE MODE TO “CD” OR “RADIO”BEFORE
REMOVING A USB FLASH DRIVE OR SD-CARD, TO PREVENT DAMAGE TO YOUR
USB DEVICE OR MEMORY CARD.
IMPORTANT
IMPORTANT POINT
Please do NOT use a USB Extension Cable to connect your USB FLASH DRIVE to the
USB PORT of this unit.
Such cables can pick up additional interference which can corrupt the data flow,
preventing normal operation and usage of the USB port. Always connect your
USB Flash Drive DIRECTLY to the USB PORT without any USB extension cables.
THIS UNIT DOES NOT SUPPORT USB-MP3 PLAYER, DUE TO THEIR INHERENT LACK
OF SOFTWARE COMPATIBILITY. ONLY USB "PEN DRIVES" (FLASH MEMORY USB
DRIVES) CAN BE USED, FOR MP3 PLAYBACK.
PROGRAM FUNCTION
- AFTER EACH TRACK NUMBER, REMEMBER TO PRESS THE KEY.
- AFTER A MAXIMUM OF SONGS (OR LESS) HAVE BEEN SELECTED AS DESCRIBED
ABOVE.
- THE CD PLAYER CAN BE PROGRAMMED TO PLAY ANY SEQUENCE OF UP TO
20 TRACKS FOR AUDIO-CD, AS DESIRED.
- ALWAYS PRESS THE
KEY BEFORE STARTING THE PROGRAMMING. STOP
- PRESS THE KEY ,THE DISPLAY WILL SHOW "01" AND THE "MEM”
SYMBOL WILL FLASH, TO INDICATE THAT THE SET IS NOW IN
“MEMORY PROGRAMMING MODE", AT THE FIRST MEMORY POSITION.
- REPEAT THE PREVIOUS 2 STEPS, EACH TIME SELECTING ANY TRACK NUMBER
OF YOUR CHOICE TO BE STORED IN THE SUCCESSIVE MEMORY (PROGRAM)
POSITIONS.
- WHEN YOU PRESS THE DISPLAY WILL ADVANCE TO
THE NEXT MEMORY POSITION (eg. "02").
THE KEY
- PRESS THE TUNE UP OR TUNE DOWN KEYS TO SELECT THE TRACK
(SONG) NUMBER YOU WISH TO BE STORED IN THE FIRST MEMORY (PROGRAM)
POSITION, AND PRESS THE KEY (ON REMOTE CONTROL) TO
CONFIRM YOUR SELECTION.
MEM/ PROG.
MEM/ PROG.
MEM/ PROG.
MEM/ PROG.
SAVED A PROGRAM-MEMORY (SEQUENCE).
- PRESSING
PLAY/ PAUSE WILL NOW PLAY BACK THE "SAVED SEQUENCE" IN
THE PROGRAM MEMORY.
- TO CLEAR (CANCEL) THE ENTIRE PROGRAM WHICH IS STORED IN THE MEMORY,
SIMPLY PRESS
STOP TWICE, OR SWITCH "OFF" THE SET.
- ALSO, THE "MEM" SYMBOL WILL REMAIN "ON" TO INDICATE THAT YOU HAVE
FUNCTION
FUNCTION