Duronic RCD144, Руководство по эксплуатации, Страница: 4 / 9

DIGITAL CLOCK FUNCTION
- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED WHEN
THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL CONTINUOUSLY SHOW
THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT IS NORMALLY
DIMMED (TO SAVE ELECTRICITY).
HOW TO SET CORRECT TIME:
E-5
*NOTE:
THAT WHEN THE DIGITAL CLOCK IS NOT SET, THE DIGITAL CLOCK DISPLAY SHALL
CONTINUOUSLY FLASH TO INDICATE THAT THE CORRECT TIME HAS NOT YET BEEN SET.
SWITCH UNIT TO "STAND- BY" MODE
PRES S & HOLD FOR 3 SECON DS
DISPLAY SHOWS HOUR OR HOUR (FLASHING)
CLOCK SET
PRES S TO SELECT 12-HOUR
OR 24-HOUR CLOCK DISPLAY SYST EM & PRES S CLOCK SET TO CONFI RM
YOUR SELECTI ON
PRES S REPE ATEDLY TO SET
THE CORREC T HOUR IN THE DISPLAY & PRES S TO CONFI RM CLOCK SET
PRES S REPE ATEDLY TO SET
THE CORREC T MINUTE IN THE DISPLAY & PRES S TO CONFI RM CLOCK SET
CORREC T TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY!
OR TUNE DOWN TUNE UP
OR TUNE DOWN TUNE UP
OR TUNE DOWN TUNE UP
E-6
90
MINS
80
MINS
70
MINS
60
MINS
50
MINS
OFF*
40
MINS
30
MINS
20
MINS
10
MINS
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS
SLEEP KEY
(ON REMOTE CONTROL) REPEATEDLY TO CHOOSE THE AUTOMATIC
POWER OFF TIME.
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
AUTOMATIC POWER OFF SLEEP FUNCTION
HOW TO SET TIMER
- THIS SET HAS A TIMER FUNCTION T O ENABLE YOU TO PROGRAM THE UNIT TO
AUTOMATICALLY SWITCH "ON" OR "OFF" AT PRESET TIMES. THIS IS USEFUL AS A MORNING
ALARM CLOCK :
1. PRESS AND HOLD TIMER KEY (ON REMOTE CONTROL). THE "TIMER ON" SYMBOL
APPEARS IN THE DISPLAY.
2. PRESS TUNE UP OR TUNE DOWN TO ADJUST THE HOUR OF THE DESIRED "ON"
TIME AND THEN PRESS TIMER KEY TO CONFIRM.
3. PRESS TUNE UP OR TUNE DOWN TO ADJUST THE MINUTES OF THE DESIRED
"ON" TIME AND THEN PRESS TIMER TO CONFIRM.
4. NOW THE WORDING IN THE DISPLAY CHANGES TO SHOW "TIMER OFF".
5. PRESS TUNE UP OR TUNE DOWN KEYS TO ADJUST THE HOUR OF THE
DESIRED "OFF" TIME AND THEN PRESS TIMER TO CONFIRM.
6. PRESS TUNE UP OR TUNE DOWN TO ADJUST THE MINUTES OF THE DESIRED
"OFF" TIME AND THEN PRESS TIMER TO CONFIRM.
7. NOW THE DISPLAY WILL INDICATE THE "WAKE UP MODE" (TUNER, CD, USB or CARD).
PRESS TUNE UP TO CHOOSE THE DESIRED MODE & PRESS TIMER TO CONFIRM.
8. THE DISPLAY THEN SHOWS T HE "WAKE UP VOLUME LEVEL" (LOUDNESS).
PRESS TUNE UP OR TUNE DOWN TO DECREASE OR INCREASE THE VOLUME
LEVEL TO BE USED FOR THE MUSIC TO BE PLAYED WHEN THE TIMER SWITCHES ON
THE UNIT AT THE PRE-SET TIME.
9. PRESS TIMER TO CONFIRM.
(NOTE : THE AU TOM ATIC ON/OFF TIMER WILL SWITCH ON T HE UNIT AS IF YOU HAVE
MANUALLY PRESSED THE "ON/ STANDBY" KEY. IF YOU HAVE SELECTED "WAKE TO RADIO",
THE EXACT PRESET RADIO BAND & STATION WILL BECOME ACTIVATED WHEN POWER
SWITCHES ON).
10. FINALLY THE UNIT WILL RETURN TO THE NORMAL DISPLAY, EXCEPT THAT THE
SYMBOL WILL BE SHOWN, TO INDICATE THAT YOU HAVE PROGRAMMED A ON/OFF
ALARM SETTING.
11. IN CASE YOU WISH TO DISABLE THE TIMER, PRESS THE TIMER KEY ONCE,
& THE SYMBOL WILL DISAPPEARS.
AUTOMATIC POWER ON/OFF TIMER FUNCTION
12 24
SNOOZE FUNCTION
- WHENEVER THE ALARM COMES ON, IT CAN BE TEMPORARILY SUSPENDED
FOR A SHORT PERIOD OF APPROXIMATELY 9 MINUTES, BY PRESSING
THE “SNOOZE” KEY (ON REMOTE CONTROL) ONCE.
- THE ALARM WILL THEN AUTOMATICALLY COME ON AGAIN AFTER APPROXIMATELY
9 MINUTES “SNOOZE” PERIOD HAS ENDED.
- THE PROCEDURE CAN BE REPEATED FOR APPROXIMATELY AN HOUR.