Duronic RCD144, Руководство по эксплуатации, Страница: 3 / 9

E-3
LOCATION OF CONTROLS
1. CD DOOR
2. USB/ SD COMPART MENT DOOR
3. SD CARD SOCKET
4. USB SOCKET
5. SPEAKER (LEFT)
6. LCD DISPLAY
7. ON/ STANDBY KEY
8. BACK/ TUNE DOWN KEY
9. NEXT/ TUNE UP KEY
10. STO P/ BAND/ CLOCK SET KEY
11. PLAY/ PAUSE/ FM MODE KEY
12. FUNCTION KEY
13. VOLUME DOWN (-)/ FOLDER/ MEM - KEY
14. VOLUME UP (+)/ FOLDER/ MEM + KEY
15. REMOTE CONTROL SENSOR
16. SPEAKER (RIGHT)
17. FM ANTENNA
18. AUX IN SOCKET
19. HEADPHONE SOCKET
20. SPEAKER OUTPUT SOCKET
(LEFT & RIGHT)
21. AC CORD & PLUG
E-4
POWER SUPPLY
PREPARATION OF REMOTE CONTROL
-
UNDER THE UNIT.
- REMOVE (GENTLY PULL OUT) THE PLASTIC "TAB" FROM THE BATTERY
COMPARTMENT AT THE REAR OF THE REMOTE CONTROL.
- TEST THE REMOTE CONTROL BY PRESSING THE ON/ STANDBY KEY TO
CHECK THAT THE UNIT SWITCHES ON PROPERLY USING THE REMOTE CONTROL. THE REMOTE CONTROL UNIT CAN BE FOUND THE BATTERY COMPARTMENT
REMOTE CONTROL:
2. EQ KEY
3. FUNCTION KEY
4. BACK/ TUNE DOWN KEY
5. PLAY/ PAUSE/ FM MODE KEY
6. NEXT/ TUNE UP KEY
7. id3/ SLEEP KEY
8. STOP/ BAND/ CLOCK SET KEY
9. VOLUME UP (+)/ FOLDER/ MEM + KEY
10. SNOOZE/ TIMER KEY
11. MEM/ PROG./ PLAY MODE KEY
12. VOLUME DOWN (-)/ FOLDER/ MEM - KEY
13. BATTERY COMPARTMENT
1. ON/ STANDBY KEY
1 2 3
4
7
10
5
8
11
6
9
12
13
WHEN THE POWER IS THE ENTIRE DIGITAL DISPLAY WILL LIGHT UP WITH
A "BLUE" BACK-LIGHT. THIS INDICATES THE HI-FI IS SWITCHED "ON" .
"ON"
IMPORTANT : HOW TO TELL IF POWER IS "ON" ?
- THIS SET WORKS ON NORMAL HOUSEHOLD AC-POWER.
- MAKE SURE THE SET VOLTAGE OF THE UNIT MATCHES YOUR LOCAL
VOLTAGE.
- INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH
AC-POWER.
- PRESS THE "ON/ STANDBY" KEY TO SWITCH “ON” THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY” MODE.
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING THE
"ON/ STANDBY" KEY (ON REMOTE CONTROL OR FRONT PANEL OF THE MAIN UNIT).
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE WHEN NOT IN USE.
7 8 9 10 11 12 13 14 15
16 5
17
1
3
2
6
4
18 19 20
21
CONNECTION OF SPEAKER BOXES
- UNWRAP THE SPEAKER-CORDS OF BOTH SPEAKER-BOXES AND INSERT THE
LEFT/RIGHT PLUGS INTO SOCKETS IN THE REAR OF MAIN UNIT.
- PLACE THE SPEAKER BOXES AS FAR APART AS POSSIBLE FOR BEST SOUND
EFFECT.
INTELLIGENT POWER SAVING SYSTEM
- THIS SET HAS A BUILT-IN POWER SAVING SYSTEM WHICH WILL AUTOMATICALLY
PUT THE SET INTO A "STANDBY MODE" TO REDUCE POWER CONSUMPTION
WHEN IT DETECTS THAT THE SET IS NOT IN USE.
- THIS AUTOMATIC SWITCHING TO "STANDBY MODE" WILL HAPPEN
APPROXIMATELY 10-15 MINUTES AFTER THE FOLLOWING CIRCUMSTANCES:
(A) "CD" MODE: CD PLAYBACK HAS STOPPED (eg. AT THE END OF A DISC).
(B) "USB" MODE: USB PLAYBACK HAS STOPPED.
(C) "CARD" MODE: SD CARD PLAYBACK HAS STOPPED.
- TO RE-ACTIVATE THE UNIT AFTER IT HAS AUTOMATICALLY SWITCHED
TO "STANDBY MODE", SIMPLY PRESS THE "STANDBY/ON" KEY TO SWITCH
ON THE UNIT.