DUROMAX DuroStar DS10000E Скачать руководство пользователя

Страница: 31 / 80

Step 2 - Check the Gas Level (Optional)

DANGER

DO NOT OVERFILL

THE GAS TANK

OVERFILLING CAN RESULT

IN A FIRE, EXPLOSION,

OR DEATH.

1.5”

Check fuel level

If running the engine on gasoline check to see that there is

sufficient gasoline in the fuel tank. The fuel gauge on top of

the tank will give a rough estimate of the gasoline level. The

gauge will appear white then fill red as the tank is filled.

Note: Fuel gauge may not register with less than 1/3 fuel

tank full.

WARNING

: Gasoline and gasoline fumes are highly flammable.

●

Do not fill the tank near an open flame.

●

Always allow the engine to cool for several minutes before refueling.

●

DO NOT overfill the fuel tank. Fuel expands when shaken or heated. ALWAYS leave

“ space or more at the top of the tank.

●

ALWAYS use fresh fuel or stabilized fuel. Old gasoline (older than 30 days) can cause

permanent damage to the fuel system.

●

Always check for fuel spills.

Содержание DuroStar DS10000E

















































































Результаты поиска

Содержание DuroStar DS10000E

Отзывы:

Похожие инструкции для DuroStar DS10000E

Бренды по названию

Популярные бренды

DUROMAX DuroStar DS10000E, Руководство пользователя

Результаты поиска

Содержание DuroStar DS10000E

Отзывы:

Похожие инструкции для DuroStar DS10000E

Бренды по названию

Популярные бренды