A S S E M B LY I N S T R U C T I O N S :
1.
With the rollator in the upright position,
open legs all the way by pushing the
front legs out. Rotate the folding lock
mechanism around to lock securely onto
cross bar to prevent the rollator from
folding while in use.
2.
Remove the two rubber plugs from each
side of the steel frame. Place both
handlebars with their pre-assembled
locking loop brakes, into the handlebar
openings and adjust to the desired
height. To do this, twist the height
adjustment handle on the outside of
each frame opening until tight.
(
CAUTION:
DO NOT EXTEND THE
HANDLEBARS BEYOND THE SECURITY MARK.)
3.
Test and adjust the tension on the
braking system mechanism to ensure
proper and secure braking before use.
4.
Align tray with seat rest by placing
the four prongs on the tray into the holes
in the seat.
5.
Hook wire basket onto hooks located
under the rest seat.
WARNING!
It is very important that you read all instructions
before assembly and use of this rollator.
This rollator should always be assembled and fitted for the
user by a qualified DuroMed authorized dealer. Before using the
rollator, be sure your weight is within the weight capacity of the
unit. This rollator will require little or no assembly and can be
performed without tools.
PARTS OF ASSEMBLY:
2 Handlebars with Loop Lock Brakes; 1 Basket; 1 Tray.
I N S T R U C T I O N S
F O R A S S E M B LY
2
1
4
3
S P E C I F I C A T I O N S
Overall Width
23”;
Wheels,
8”x 2”;
Seat,
15” x 8.5”;
Seat Height,
24”;
Basket,
16” x 12” x 7” deep;
Tray
15.5” x 10” x 1” deep;
Handle Height,
31” - 38.5”;
Width Between Handles,
17”;
Weight,
28 lbs.;
Weight Capacity,
250 lbs.
5
I T E M # 1 0 1 3
