manualshive.com logo in svg

Dürkopp Adler 755 B, Руководство по эксплуатации

Поделиться
Скачать
Dürkopp Adler 755 B Скачать руководство пользователя страница 97

Operation

Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021

95

15. Press the right pedal forward.

The vacuum is switched on to fix the jacket front part in place.

16. Press the left pedal forward.

The flap turning device swivels up and turns the flap (15).
The feeding device (14) grasps the flap (15) and clamps it.
The transport carriage moves to the loading position.
The transport clamps are lowered.

17. Press the left pedal forward.

Holding the picked-up and incised piping strip, the pick-up folder (16) 
swivels into the vertical position and lowers the jacket front part.
The folding plates close.

18. Press the left pedal forward.

The feeding device (14) with the flap (15) swivels in.
The feeding device (12) holding the pocket bag (11) swivels in.
The flap clamps on the transport clamps close.

19. Press the left pedal forward.

The sewing process starts.

Positioning correction

To make 

positioning corrections

:

1. Press the left pedal back.

• 1

st

 pedal tap: The flap clamps open

• 2

nd

 pedal tap: The feeding devices swivel back

• 3

rd

 pedal tap: The folding plates open, and the pick-up folder 

swivels back to its initial position

• 4

th

 pedal tap: The transport clamps lift

• 5

th

 pedal tap: The transport carriage returns to its waiting position

Information

Any visible offset of checks / stripes after the flap has been pulled through 
the respective jacket front part can be compensated by making adjust-
ments at the control panel.

You adjust the stripe correction at the control panel OP7000. 
Program parameters > Pattern matching (

p. 56

 and 

p. 184

)

Содержание 755 B























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды