DURKOPP ADLER DAC eco M-Type, Инструкция по эксплуатации

Страница: 27 / 40

Operation
Instructions for use DAC eco M-Type - 01.0 - 10/2015 25
3. Press the foot pedal forward.

LEDs S1 and S2 flash.
4. Turn the handwheel until the needle tip is on the throat plate.
5. Press and hold button S1 to confirm input.

LED S2 flashes.
Either continue by setting position 1 or exit the parameter while
keeping button
S2 pressed.
Setting the position 1
Position 1 (lower dead center) indicates the position where it
needle is at its lowest point.
To set the position 1:
1. Turn handwheel until the needle below changes direction.
2. Press and hold button S1 to confirm input.

LED S1 flashes.
Either continue by setting position 2 or exit the parameter while
keeping button
S2 pressed.
Risk of injury by the needle tip.
Accidentally pressing the foot pedal may result in
minor puncture injuries.
Secure the sewing area.
WARNING