DURKOPP ADLER DAC eco M-Type, Инструкция по эксплуатации

Страница: 21 / 40

Operation
Instructions for use DAC eco M-Type - 01.0 - 10/2015 19
Switching on the controller
1. Press the main switch (3) down to position I.

The POWER LED (1) illuminates green.
You can begin sewing and pushing the foot pedal forward.
Switching off the controller
When you are finished your work switch off the controller.
1. Press the main switch (3) up to position 0.

The MESSAGE LED (2) illuminates red.
5.2.2 Using buttons
While in sewing mode, you can select the following machine
functions with the buttons:
Buttons and use
To select a machine function:
1. Briefly press the corresponding button.

The machine beeps briefly.
You will recognize whether a machine function has been
activated by the LED in the respective button.
When the POWER LED is on you can sew. Programming is
possible outside of sewing only (

S. 20 ).
Button Use
S1 • Select needle stop position:
up = LED illuminates
down = LED off
S2 • Switch on soft start