DURKOPP ADLER 911-210-3020-10 Скачать руководство пользователя страница 80

Страница: 80 / 128

Programming

Operating Instructions 911-210-10 - 00.0 - 06/2020

5.12.4 Setting the brightness

To set the brightness:

In the menu item

Extras

Service

Einstellungen

(Settings)

press the

Bedienfeld-Einstellungen

(Control panel settings)

option.

In the following window press the

Kontrast (Contrast)

Helligkeit (Brightness)

option.



A window with slider controls is displayed.

Pull the corresponding slider control up or down to change the value.



The changes are immediately visible on the display.

5.12.5 Testing the touchscreen

You can use the

Extras

Service

Einstellungen

(Settings)

menu item to check that the touchscreen is functioning

correctly over all areas of the screen.

To test the touchscreen:

In the menu item

Extras

Service

Einstellungen

(Settings)

press the

Bedienfeld-Einstellungen

(Control panel settings)

option.

In the following window press the

Touch

Test

option.



An empty window is opened.

Use your finger to press various different points or draw lines.



When the touchscreen is functioning correctly all touched points of
the screen are marked.

Содержание 911-210-3020-10

































































































































Результаты поиска

Содержание 911-210-3020-10

Отзывы:

DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации, Страница: 80 / 128

Результаты поиска

Содержание 911-210-3020-10

Отзывы: