DURKOPP ADLER 911-210-3020-10 Скачать руководство пользователя страница 23

Страница: 23 / 128

Operation

Operating Instructions 911-210-10 - 00.0 - 06/2020

4.5

Switching on threading mode

Fig. 5: Switching on threading mode

Switching on threading mode

To switch on threading mode:

Press the button (1).



The machine is in threading mode.
The button (1) lights up.
The sewing feet are lowered.
The hook cover (2) is opened and lit.

Switching off threading mode

To switch off threading mode:

Press the button (1) again.

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Prior to any maintenance or cleaning work, switch
off the machine or set the machine to threading
mode.
When threading mode is active, do not reach into
the hook area until this is lit up.

(1)

- Button for threading mode

(2)

- Hook cover

①

②

Содержание 911-210-3020-10

































































































































Результаты поиска

Содержание 911-210-3020-10

Отзывы:

DURKOPP ADLER 911-210-3020-10, Руководство по эксплуатации, Страница: 23 / 128

Результаты поиска

Содержание 911-210-3020-10

Отзывы: