DURKOPP ADLER 4182i-1, Руководство пользователя

Страница: 8 / 11

6
5. Basic setting of the Mini-stop
5.1 Generally
The Mini-stop DC 1550/DA320 does not necessarily need the control panel V810/VV820 when running. All parameters can be set
using push the buttons and the display on electronics box, the panel V810/V820 will however enable the operator to work more
easily with regard to its position. The description of the push-button panel and that of the panels V810/V820 is given in the
instruction manual, part A, par. 7. The general procedure of setting parameters with the panel V8120/V820 is given in the
assembling instructions with standard drives, part. B1, par. 5.1 and appllies also to DC 1550/DA320.
5.2 Setting of Mini-stop EFKA DC 1550/DA320
Elements of the electronics box
Front side
S1 Button P calling or leaving the programming mode
S2 Button E option of initial bartack (switched off, simple, double) within the programming mode of the confirmation
of changes
S3 option of final bartack (switched off, simple, double) within theprogramming mode of enhancing
the displayed value
S4 Button - position of the presser foot when stopping in the seam (down, up)
position of the presser foot after trimming (down, up) within the programmed mode of reduction of
the displayed value
S5 Button » position of the needle when stopping in the seam (down, up) within the programming mode of shifting to
the next digit
LED1 indication for the start single bar
LED2 indication for the start double bar
LED3 indication for the end single bar
LED4 indication for the end double bar
LED5 ndication for automatic presser foot lifting when stopping in the seam
LED6 indication for automatic presser foot lifting after having ended the seam (trimming)
LED7 indication for stopping in the seam with the needle in its bottom position
LED8 indication for stopping in the seam with the needle in its top position
Display 3 digits
Reae side
B2 connection of the commutating motor scanner
B18 connection of the light barrier module (photocell)
B41 connection of the motor stator winding
B80 connection of the pedal set value initiator
B776 connection of the panel V810/V820
A (ST2) connection of electric elements of the sewing machine (electromagnets, electropneumatic valves,
push-buttons )