ROOF ASSEMBLY
IMPORTANT—FOR SHEDS WITH OPTIONAL CLEAR
ROOF PANEL
Assemble as below, making sure that the Clear Roof Sheets
overlap the standard roof sheets on both sides.
The Clear Roof Panel must be secured to the Top Plate and the
Ridge Beam. Pre drill and fasten with the 50mm roofing screws
provided.
.
STEP 1:
•
Place the Ridge Beam on a level surface and use 2 x 75mm
screws to secure the Jack Studs to the underside of the Ridge
Beam, one at each end (
fig. 1
).
•
Turn the Ridge Beam /Jack Stud assembly over and place it on
the timber Top Plate in a central position.
•
Secure with 2 x 75mm screws through the top of the Jack Studs
into the Timber Top Plate (
fig. 2
).
•
Check that the shed is sitting level and square and that the diago-
nal Top Plate measurements are the same.
SELECT:
12 x 1.600 m Roof Sheets
2 x 1.600 m 1 Pan Roof Sheet
2 x 3.225 m Spouting
4 x 1.600 m Barges
2 x 1.800 m Ridge Cap
1 x 3.190 m Ridge Beam
2 x 0.200 m Jack Studs
8 x 75mm Screws
36 x 50mm Roofing Screws
74 x Rivets
44 x 50mm Clouts
12
JACK STUD
TOP PLATE
RIDGE BEAM
fig. 1
fig. 2
STEP 2:
•
Position the first Roof Sheet so that the top of the sheet is at the
centre of the Ridge Beam and the side of the sheet over hangs the
end of the Ridge Beam (
fig .3
). Using 1 x 50mm Clout, predrill and
nail through the rib into the top corner. Repeat above and nail the
lower corner ensuring 15mm overhang.
•
Position the remaining front Roof Sheets and rivet them together as
shown.
•
Nail the last sheet to the Ridge Beam and the Top Plate ensuring
the Roof Sheet overhangs the end of the Ridge Beam and the Top
Plate by 15mm.
•
Nail front Roof Sheets to Ridge Beam using 1 x 50mm clout per rib.
Screw to Top Plate using 1 x Roofing screw per rib (
fig.4
) ensuring
Ridge Beam and Top Plate are straight.
•
Repeat with remaining roof sheets.
fig.4
Pan
Rib
SIDE
WALL
FRONT WALL
BACK WALL
SIDE
WALL
TOP PLATE
BOTTOM PLATE
RIDGE
BEAM
SIDE
WALL
FRONT WALL
BACK WALL
SIDE
WALL
TOP PLATE
BOTTOM PLATE
fig. 3
15mm
JACK STUD
RIDGE BEAM
TOP PLATE
ROOF SHEET
Содержание Gurdian Sheds GG101
Страница 1: ...ASSEMBLY INSTRUCTIONS GG101 BASE SIZE 3 190m x 3 020m...
Страница 2: ......
