7
BODY INSTALLATION
• Decal the body to your liking. Use the
photos on the box as a reference.
• Install the body onto the chassis using
four body clips.
MAINTENANCE
TIPS
BEFORE EACH RUN
• IMPORTANT: Check to make sure
that all screws are tight. Always use
threadlock (DTXR2010) on screws
threading into metal.
•
Check the condition of your radio system batteries and
replace/recharge if necessary.
•
Make sure that all of the moving parts of the Vendetta SC
move freely and do not bind.
•
Turn on the radio and make sure the servo moves easily
and in the proper direction.
•
Check for any broken or damaged parts. Replace them before
running the Vendetta SC. Running the Vendetta SC with
broken or damaged parts could damage additional parts.
• Make sure that all wires are properly connected.
• Make sure the ESC, servo and receiver are properly secured.
AFTER EACH RUN
•
Clean any debris from the chassis and moving parts.
•
Check for any broken or damaged parts. Replace them
before the next run.
• Disconnect and remove the battery from the chassis.
• Allow the motor and ESC to cool.
AFTER EVERY 10 RUNS
• Make sure that the bearings are free of dirt and debris, and
roll smoothly.
• Check the shocks for oil leakage. Inspect the shafts and
O-rings for wear and damage. Replace if necessary. IF a
shock shaft has scratches you can feel with a fingernail, it
should be replaced.
• Make sure the tires are still securely glued to the rims.
