Duratrax Street Force GP Скачать руководство пользователя страница 16

ACCESSORIES AND OPTIONAL PARTS

Graphite Radio Tray and Shock Towers

Add graphite components for lighter weight
and ultra high strength.

DTXC8406 Graphite Radio Tray
DTXC9196 Graphite Front Shock Tower
DTXC9253 Graphite Rear Shock Tower

DuraTrax Deluxe Glow Plug Wrench

This single, heavy-duty, plated steel tool
handles FIVE metric hex sizes: 7-, 8-, 10-, 12-
and 17mm—and includes a special 10mm
socket for pilot shafts! Threaded holes tapped
between the wrenches store up to four spare
glow plugs. 

DTXR1170

DuraTrax Red Alert™ 20% Racing Fuel

To make your TORQ™ 21 engine run faster,
better and longer, you need the unique
formula of DuraTrax Red Alert. Red Alert
contains 20% nitro plus a carefully race-tested
blend of castor and synthetic oils. 

DTXP0600

DuraTrax Nitro Starter Set

This set includes everything you need to start
racing. 5-way glow plug wrench, 1 qt. of Red
Alert fuel, Hobbico

®

glow starter w/charger,

fuel bottle and glow plug. 

DTXP0200

DuraTrax Crankshaft Locking Tool

Remove your engine’s clutch safely with this
easy to use, anodized metal tool. Works with
all .10 to .21 car and buggy engines.

DTXR1100

DuraTrax XL Field Bag

Keep your gear loaded and race ready with
the XL field bag. Heavy duty black nylon bag
with red trim and white logo. 

DTXP2000

3.25mm T-6 Aluminum Chassis

30% thicker than the stock chassis, and made
from stronger, hard-anodized 7075 T6 aluminum
for even greater flex-resistance than the original.

DTXC7026

Stabilizer Bar Kits

Will improve handling by limiting body roll in
tight turns.

DTXC9415 Stabilizer Bar Kit 1.8mm
DTXC9416 Stabilizer Bar Kit 2mm

DuraTrax Kwik-Pit™ 500cc Fuel Bottle

Fast, clean pit stops are as close as the Kwik-
Pit Fuel Bottle. The long, angled neck reaches
easily into your tank to prevent fuel spills, the
clear plastic body keeps the fuel level in plain
sight and moving fuel from the bottle to your
tank takes just a gentle squeeze.

DTXP0150

Содержание Street Force GP

















Отзывы: