Servicing and information
Have your power tool serviced by a q
repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Contact your retailer for any other issues.
For further details visit
WWW.Duratool.co.uk
PLUG REPLACEMENT
The fuse in the main plug of your power tool should always be replaced with one of
identical rating
Check the voltage given on your powe
r tool matches the supply voltage
The power tool is supplied with a
plug, however if you should need to
a new plug
follow the instructions below.
Important
The wires in the mains lead are coloured in accordance with the following code:
Blue = Neutral
Brown – Live
As the colours of the wires in the mains lead of this appliance may not correspond with the
colour markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with N.
The wire which is coloured brown must be connected to the terminal which is marked
with the letter L.
If a 13 Amp (BS 1363/A) plug is used, a BS 1362 5 Amp fuse must be tted or if any other
used a 5 Amp Fuse must be tted, either in the plug or adaptor, or on the
If a moulded plug is
and has to be removed take great care in disposing of the plug
and severed cable, it must be replaced by a service agent or a similarly qu
ed person in
order to avoid hazard
ENVIRONMENT
Should your appliance need replacement after extended use do not
discard it with the
type of plug is
distribution board.
Environment
Plug replacement
10
