background image

Storage

Warranty

Cleaning and Maintenance

Cleaning
Keep the ventilation slots of the machine clean to prevent the motor overheating
Regularly clean the machine housing with a soft cloth, preferably after each use
Keep the ventilation slots free from dust and dirt

·

·

·

·

·

·

·

·

Service and Repair

(

Qualified electrician

)

Thoroughly clean the whole machine and its accessories

Store it out of reach of children, in a stable and secure position, in a cool dry place,
avoid too high and too low temperatures

Protect it from exposure to direct sunlight. Keep it in the dark if possible
Don’t keep it in a plastic bag to avoid humidity build-up

7

This Duratool product is guaranteed for a period of 1 Year,

t from th date of 

purchase and applies only to the original purchaser. This guarantee only applies to defects
arising from, defective materials and or faulty workmanship that become evident during
the guarantee period only and does not include consumable items. The manufacturer will 
repair or replace the product at their discretion subject to the following. That the product
has been used in accordance with the guide lines as detailed in the product manual and 
that it has not been subjected tomisuse,abuse or used for a purpose for which it was not 
intended. That it has not been taken apart or tampered with in any way whatsoever or has 
been serviced by unauthorized persons or has been used for hire purposes.Transit damage 
is excluded from this guarantee, for such damage the transport company is responsible.
Claims made under this guarantee must b

e,directly to the retailer

within the guarantee period. Only under exceptional circumstances should the product be
returnde to the manufacturer.In these cases it shall be  the consumer’s responsibility to
return theproduct at their cost ensuring that the product is adequately packed to prevent
transit damage and must be accompanied with a brief description of the fault and a copy
prevent transit damage and must be accompanied with a brief description of the
fault and a copy of the receipt or other proof of purchase. The manufacturer shall not be
liable for any special,exemplary, direct, indirect, incidental, or consequential loss or damage 
under this guarantee.

9

Содержание D01965













Отзывы: