manualshive.com logo in svg

Duratech 4426, Инструкция по эксплуатации и справочник по запасным частям

Поделиться
Скачать
Duratech 4426 Скачать руководство пользователя страница 20

12

1 0 7   D R I L L

O P E R A T I N G   I N S T R U C T I O N S

Section 2:  Dealer Preparation

2.1  Gauge Wheel Attachment

The heavy duty gauge wheels mount on the tool bar in front of the drill. The gauge wheels are adjustable to maintain a
uniform planting depth when on side hills.

INSTALLATION

Step 1:

Place the gauge wheel mount assembly in front of the second run assembly from either tool bar end.
See the accompanying illustration.

Step 2:

Mount the gauge wheel mount assembly to the tool bar by using two gauge wheel mount straps and
four 5/8” x 6-1/2” hex bolts, lock washer and nuts provided. See accompanying illustration.

Step 3:

Repeat Step 1 and Step 2 for the gauge wheel on the other side of the tool bar.

Step 4:

Lift the tool bar using the drill’s hydraulics and insert both gauge wheels into the bottom of the
gauge wheel mount assemblies.  See the accompanying illustration.

Step 5:

If conditions prevent Step 4 from being done, the gauge wheels can be inserted into the front of the
gauge wheel mount assemblies.  To do this, remove all four bolt sleeves (two per gauge wheel
mount assembly) by unbolting the four 3/4”  x 6” hex bolts, lock washers and nuts and push the
gauge wheels into the mount assemblies.  Bolt the bolt sleeves on to the gauge wheel mount
assemblies again.

Step 6:

Adjust the gauge wheels to the desired position by inserting the adjustment handle through the
proper gauge wheel adjustment with the hair pin.  This adjustment determines the gauge wheel
height that maintains the uniform planting depth on side hills.  See the accompanying illustration.

Содержание 4426

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды